0.8w/M.K 50m Length Double Sided Thermal Adhesive Tape
Thermal conductivity double-sided adhesive tape is simple and convenient to use, which will help improve production efficiency, widely
used in LED lamps and low-power IC to effectively solve small radiator fixed problem, replace the screw fixation, achieving the most
effective cooling.
Physical properties
|
Substrate material |
Fiberglass |
Fiberglass |
Fiberglass |
Fiberglass |
Fiberglass |
Fiberglass |
Fiberglass |
|---|---|---|---|---|---|---|---|
|
Color |
white |
white |
white |
white |
white |
white |
white |
|
Thickness |
0.1mm |
0.15mm |
0.2mm |
0.25mm |
0.3mm |
0.4mm |
0.5mm |
|
180° peel force (PSTC-101)(N/25mm) |
>13 | >14 | >15 | >16 | >17 | >18 | >19 |
|
Retentivity (1 kg / inch / 25 ° C) |
>48 | >48 | >48 | >48 | >48 | >48 | >48 |
|
Temp resistance(long term) |
120 | 120 | 120 | 120 | 120 | 120 | 120 |
|
Temp resistance(short term) |
180 | 180 | 180 | 180 | 180 | 180 | 180 |
|
Voltage Endurance |
2 | 3 | 3.5 | 3.8 | 4 | 4.5 | 5.0 |
|
Initial adhesive(kg/inch) |
1.1 | 1.4 | 1.4 | 1.4 | 1.5 | 1.5 | 1.6 |
|
Use temp |
-20~120 | -20~120 | -20~120 | -20~120 | -20~120 | -20~120 | -20~120 |
|
Conductivity (ASTM D5470)(w/m-k) |
0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
|
Storage and shelf life |
To maintain the best performance at a temperature of 23 ° C ± 5 ° C, relative humidity of 60% ± 10% in the original box.In addition,to the use of this product within 12 months from the date of production. |
||||||
Configurations available: 1040mm*25M/50M;customized size available.
Features and benefits
- Perfect thickness standard
-
Easy to install,replace the screw fixed
-
Excellent adhesion strength and thermal insulation
-
Fixed the heatsink to the packaged chip
- Fixed the heatsink to the power supply PCB board or vehicle control circuit board
- Assembly between led tube and metal frame
- Can replace hot melt adhesive,screw and buckle to be fixed
Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.
Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.
Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.
Q:Will the heat make the thermal pads softer?
A: ShoreC 20~80 ,there is no significant change in the hardness of thermal pads, as gap filler.
Q: What’s the tolerance for the thickness?
A :Normally ±0.1mm.
Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.
Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.
Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.M-TS series has fiberglass on its surface, all other models will be made at your requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.