ROHS 1.8g/Cm3 Double Sided Thermal Adhesive Tape
Feature of adhesive fiberglass masking tape
1:High bond strength to surface
2:Thermal conductivity in combination with electrical isolation
3:Good heat transfer
4:High temperature stability
5:Voltage resistance
Application of adhesive fiberglass masking tape
1:Mounting of heat sink to"hot spot"(processor,motors etc)
2:Mounting of heat spreader to hot devices
3:LED lighting application
4:Electronic equipments
5:The adhesion and fixing of chips and heat sink
Properties of adhesive fiberglass masking tape
|
Test item |
Test mothods |
Unit |
Test value |
|
Color |
Visual |
/ |
white |
|
Thickness |
ASTM D374 |
mm |
0.15~0.5 |
|
Specific gravity |
ASTM D792 |
g/cm3 |
1.8±0.1 |
|
Tacky status |
ASTM D2240 |
N/25mm |
18.5±0.5 |
| Tensile strength |
ASTM D412 |
kg/cm2 |
8 |
|
ASTM D412 |
Pa |
5.88*109 |
|
|
Temp range |
EN344 |
ºC |
~40+220 |
|
Volume resistivity |
ASTM D257 |
Ω-CM |
2.9*1011 |
|
Voltage endurance |
ASTM D149 |
KV/MM |
5 |
|
Thermal conductivity |
ASTM D5470 |
W/M.K |
0.8~1.5 |
|
1:The data of adhesive fiberglass masking tape is just for reference.
2:Different thermal conductive tape has different application areas,
any application solution question,welcome to check with our team. |
|||
Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.
Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.
Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.
Q:Will the heat make the thermal pads softer?
A: ShoreC 20~80 ,there is no significant change in the hardness of thermal pads, as gap filler.
Q: What’s the tolerance for the thickness?
A :Normally ±0.1mm.
Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.
Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.
Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.M-TS series has fiberglass on its surface, all other models will be made at your requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.