Chinese Factory Diesel Japanese Isuzu 4HG1 Truck Spare Parts Drag Link Truck Steering System Parts 8-97170-160-0

Chinese Factory Diesel Japanese Isuzu Truck Spare Parts Drag Link Truck Steering System Parts 8-97170-160-0

Install the New Drag Link Assembly

1. Clean the tapered holes in the steering arm and pitman arm with a clean cloth.

2. Reconnect the drag link. For two-end adjustable draglinks, reposition the ends into the tube until the measurement for the end of the tube to the nearest outside swage diameter is the same as you measured in Step 2 under "Remove the Draglink Assembly". Torque the nut to the manufacturer's specifications. Install the cotter pin.

3. Make sure the adjustable end(s) are threaded into the tube deeper than the slot in the tube. 4. If the clamps are not tack-welded, seat the tabs on the clamps against the end of the tube. Position the bolts as noted earlier. Tighten the clamps and torque to manufacturer's specifications.

2. Detailed Product Pictures

Center the Socket Ends

1. Loosen the clamp on the PITMAN ARM END of the drag link.

2. Grasp the long side of the drag link with both hands. Rotate the drag link away from you as far as it will go, then toward you as far as it will go. Center the drag link between these two points.

3. Hold the long side in place. Grasp the short end of the drag link (socket only) and rotate it as far toward you and away from you as it will go. Center the short end between these two points.

4. With both ends centered, position the clamp on the PITMAN ARM END as noted earlier. Tighten the clamp and torque to vehicle manufacturer's specifications. 

3.Product Advantages

- 100% Same Original Parts Finishing

- Long-lasting Performance

- Strong Durability

4. FAQs

Q: If I am not satisfied with the products, can I returns goods?

A:Yes, we offer exchange and repair service under warranty. Please contact us before you return.

Q: Which shipping term you can supply?

A:By sea, air or by express ( DHL, Fedex, TNT, UPS, EMS)

Q: What is your service process?

A:Please use the contact form down below to send us inquiry. We will get back to you in the next 8 hours and confirm the parts you need and quote you prices.