Stable Carbon Steel CNC Control Wire Straightening And Cutting Machine

Site requirements

The working medium of the welding mesh machine is taken from enough space, so it must have a minimum requirement for the working environment, and the space must be guaranteed to have sufficient open area to communicate with the outside world. At the same time, it must meet the basic operating environment conditions of pneumatic welding mesh machine. The machine is placed directly on a dry, flat, hard ground and can work normally. In the case of soft or uneven, inclined ground, cement foundation and pad iron can be arranged under each part of the machine.

Notes to the Steel Wire Straightening And Cutting Machine:

1.The Steel Wire Straightening And Cutting Machine​ user must do the operation and maintenance in strict accordance with the equipment manual.
2. Prepare the site for Steel Wire Straightening And Cutting Machine installation must be according to the requirements
3. Supply power and gas according to the Steel Wire Straightening And Cutting Machine​ requirements.
4. Users are required to provide technical staff to assist in the installation, during installation, users need to install the Steel Wire Straightening And Cutting Machine provided free of charge auxiliary equipment.
5. The Steel Wire Straightening And Cutting Machine​ should be used in the workshop; the work environment will directly affect the performance and service life of the equipment.