Convenient Operation 4-8mm Wire Straightening And Cutting Machine

If the machine is not in use for a long period of time, the main power supply should be cut off to ensure safety, cut off the supply of air and water, do anti-rust treatment on the machine, apply anti-rust oil, remove dirt on the upper and lower electrode blocks, keep it clean, apply proper amount of lubricating oil on the mechanical transmission parts such as gears, sprockets, etc., blow off the dust of the fuselage and cover it with plastic film.

Gas supply equipment or water pump should also do corresponding maintenance.

Keep the machine storage place clean, non-corrosive liquid, water, no dangerous goods storage.

Notes to the Convenient Operation 4-8mm Wire Straightening And Cutting Machine:

1. The Convenient Operation 4-8mm Wire Straightening And Cutting Machine user must do the operation and maintenance in strict accordance with the equipment manual.
2. Prepare the site for Convenient Operation 4-8mm Wire Straightening And Cutting Machine installation must be according to the requirements
3. Supply power and gas according to the Convenient Operation 4-8mm Wire Straightening And Cutting Machine.
4. Users are required to provide technical staff to assist in the installation, during installation, users need to install the Convenient Operation 4-8mm Wire Straightening And Cutting Machine provided free of charge auxiliary equipment.
5. The Convenient Operation 4-8mm Wire Straightening And Cutting Machine​ should be used in the workshop; the work environment will directly affect the performance and service life of the equipment.