Cable Tray Wire Mesh Bending Machine Servo Pull Hydraulic
Cablofil grid Cable tray Wire Mesh Bending Machine
Operators must be skilled in the construction, performance, operation and maintenance of the welder, and after training before the machine operation.
| Item | Product type | Parameter | Remark |
| 1 | Max. welding capacity | ¢ 6.0+6.0mm | |
| 2 | Long wire diameter | ¢3-6mm | |
| 3 | Cross wire diameter | ¢3-6mm | |
| 4 | Long wire feeding method | In pre-cut | |
| 5 | Cross wire feeding method | In pre-cut | |
| 6 | Long wire spacing | ≥50mm | Mechanically adjustments |
| 7 | Cross wire spacing | ≥25mm | Programming adjustments |
| 8 | Length range of wire mesh | ≤6000mm | Adjustable |
| 9 | Width range of wire mesh | ≤1600mm | Adjustable |
| 10 | Number of welding spot | 32PCS | |
| 11 | Working speed max. | 40-60times/min |
1 By means of hydraulic bending, the mesh is placed manually in the fixed position of the Cablofil grid Cable tray Wire Mesh Bending Machine. After starting the switch,
2 the upper beam of Cablofil grid Cable tray Wire Mesh Bending Machine bends the mesh by hydraulic pressure, and the die needs to be replaced at different Cablofil grid Cable tray Wire Mesh Bending Machine angles and shapes.
3 the T-type and the wave wire can both welding in the full-auto line.The material is stainless steel, which can be dropped directly through the chain.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.