Outdoor Duplex LC 2 Core Armored Fiber Optic Patch Cord Single Mode Waterproof
Waterproof Outdoor Duplex LC Single-Mode 2 Core Armored Fiber Optic Patch Cord
1.Brief Introduction:
Armored fiber optic patch cables retain all the features of standard patch cords but are much stronger. Armored fiber optic patch cables will not get damaged even if stepped by an adult and they are rodent-resistant. By using an armored patch cable you don't need to worry about rodents like rats that may bite the cables. Armored fiber optic cables are strong; they are actually as flexible as standard fiber optic patch cords. Armored fiber optic patch cords are made a with similar outer diameter to standard patch cords, make them both space-saving and strong. What's more, they can be made with different jacket colors and jacket types such as OFNR, etc.
Armored fiber optic patch cords can be made with LC, SC, FC, ST, LC/APC, SC/APC, FC/APC, and other types of connectors.
2.Single-Mode Fiber Optic Patch Cord Features:
-- 100% factory tested to ensure performance to TIA/EIA-568-B-2
-- Complying with Telcordia, GR-326-Core, IEC, and RoHS Standard
-- Complete connector range of SC, ST, LC, FC, MTRJ
-- Low insertion loss, high return loss
-- High precision of mechanical dimensions
-- Ferrule End-face: PC, UPC,APC
-- Good repeat-ability and ex-changeability
-- Simplified ordering and inventory
3.Fiber Optic Patch Cord Applications:
> Local Area Network (LAN)
> Data communication network
> Telecommunication optical transmission network
> Optical access network(OAN)
> Active device termination
> Fiber optics data transmission
> Test Equipment and CATV
> Gigabit Ethernet
4. Specification&Technology Parameter
| Parameters | Value | ||||
| Connector Type | FC/UPC,SC/UPC,LC/UPC,MU/UPC | ||||
| Center Wavelength(nm) | 1310 or 1550 | ||||
| Max.Insertion Loss(dB) | 0.25 | ||||
| Min.Extinction Ratio(dB) | 23 | ||||
| Min.Return Loss(UPC) (dB) | 50 | ||||
| Min.Return Loss(APC) (dB) | 60 | ||||
| Key Orientation | Slow Axis | ||||
| Axis Alignment(deg) | ±3 | ||||
| Operating Temperature(℃) | -20~+70 | ||||
| Storage Temperature(℃) | -40~+85 | ||||
| FIber Type | PM Panda Fiber | ||||
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER is 2dB lower.
* The default connector key is aligned to the slow axis.
LC To LC Fiber patch cord Specification:
| Parameter | Unit | Index | |||
| End-Face Type | PC | UPC | APC | ||
| IL | dB | SM: ≤0.3；MM ≤0.1 | |||
| Repeatability | dB | ≤0.1 | |||
| interchangeability | dB | ≤0.2 | |||
| RL | SM | dB | ≥45 | ≥55 | ≥60 |
| MM | dB | ≥36(Without APC connector) | |||
| Mating Times | ＞1000 | ||||
| Operating Temperature | ℃ | -40~ +80 | |||
5.Ordering Information:
| OFC | -X | -XX | -XX | -XX | -X | -X |
| S: Simplex D: Duplex |
FA:FC/APC FC:FC/UPC FP:FC/PC | FA:FC/APC FC:FC/UPC FP:FC/PC | 09:0.9mm 20:2.0mm 30:3.0mm | 0:G652D 1:G657A 2:50/125 3:62.5/125 4:others | 0.5:0.5m 1.0:1.5m 10:10.0m |
|
| Fiber Mode | Connector Type | Connector Type | Cable Diameter | Flange Type | Fiber Length |
* EX:OFC-S-FA-FC-09-1-0.5
6. Related Products
In order to keep you, I prepared a special gift
Please leave your email address we will contact you directly.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.