Digital Online chlorine dioxide meter RS485 For Swimming Pools Disinfectant
Digital Online Chlorine Dioxide Controller RS485 For Swimming Pools Disinfectant
Product Introduction
Chlorine dioxide disinfectant is an internationally recognized high-efficiency disinfectant. It is very safe and has no residual toxicity. With the widespread application of chlorine dioxide as a disinfectant, it is very important to detect and control its concentration. DRFN’s DUC2-CD-H chlorine dioxide controller is used for the measurement of chlorine dioxide. It is a digital meter, which can be connected to DRFN’s digital chlorine dioxide sensors.
Features Of The Chlorine Dioxide Controller
● RS485 interface, MODBUS RTU communication protocol
● Time and historical data recording function
● 128*64 large LCD screen, adjustable backlight mode
● Power-off protection configuration, parameters can be kept indefinitely
● A variety of installation methods: wall, pipe clamping, and panel installation
● 2 settable 0/4~20mA active current loop outputs
● Provide AC or DC power supply mode, both of which are wide-voltage power supply
Applications Of The Chlorine Dioxide Controller
● Disinfection Systems
● Cooling Towers
● Water Treatment
Technical Parameters
| Product Name |
Chlorine Dioxide Controller |
| Product Model |
DUC2-CD-H |
| Software Version |
DRFN chlorine dioxide Analysis software V1.0 |
|
Display Range |
0.01mg/L~100g/L |
|
Resolution |
0.01mg/L |
|
Relay Control |
2 settable SPST relays max. load 3A/250VAC |
|
Analog Current Output |
2 settable 0/4~20mA active current loop output max. load 1000Ω |
|
Communication Method |
Two-wire RS485 interface; MODBUS RTU; support JSON text data format |
|
Display Screen |
128*64 LCD, adjustable backlight mode, adjustable display rate |
|
Time/Data Record |
Year/month/day/hour/min/second, record 14000 historical data, record interval can be set between 1~999 minutes |
|
Maintenance Records |
Last 100 times |
|
Protection Level |
IP66 |
|
Operating Environment |
0~60℃, relative humidity less than 95% (no condensation) |
|
Storage Environment |
-20~70℃, relative humidity less than 55% (no condensation) |
|
Shell Material |
Enhanced ABS |
|
Size |
144*144*120mm (hole size 138*138 mm) |
|
Mounting Method |
Wall mounting, pipe clamping, panel mounting |
|
Power Supply |
18~36V DC or 100~240V AC |
|
Weight |
800g |
|
Power Consumption |
7W |
The Suitable Chlorine Dioxide Sensors Recommendation
- Model: AS2 AS3
- pH range: 1~12
-
Pressure range: 0~8 bar
- Temperature range: 0~50℃ (AS2), 0~70℃(AS3)
- Automatic temperature compensation
- Response time: T90 about 30 s
- Flow rate: about 30 l/h
-
Shaft length: standard 175 mm
- Connection: Modbus RTU with M12 male
- Material: PVC-U (AS2), PEEK (AS3)
|
Type: (50℃) |
Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
| AS2H-CD-M0c | 0.005~2.00 | 0.001 |
Modbus RTU |
9~30 V DC 20~56 mA |
3426820 |
| AS2N-CD-M0c | 0.03~10.00 | 0.01 | 3426821 |
|
Type: (70℃) |
Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
| AS3H-CD-M0c | 0.005~2.00 | 0.001 | Modbus RTU |
9~30 V DC 20~56 mA |
3426870 |
| AS3N-CD-M0c | 0.03~10.00 | 0.01 | 3426871 |
- Model: CD4.2
- pH range: 1~12
-
Pressure range: 0~1 bar
- Temperature range: 0~45℃
- Automatic temperature compensation
- Response time: T90 about 15 s
- Flow rate: about 30 l/h, low flow-dependence
-
Shaft length: standard 175 mm
- Connection: Modbus RTU with M12 male
- Material: PVC-U, semipermeable membrane
|
Type |
Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
|
CD4.2H-M0c |
0.005~2.000 | 0.001 | Modbus RTU |
9~30 V DC 20~56 mA |
3326465 |
|
CD4.2N-M0c |
0.05~20.00 | 0.01 |
3326466 |
- Model: CD7
- pH range: 1~11
-
Pressure range: 0~1 bar
- Temperature range: 0~50℃
- Automatic temperature compensation
- Response time: T90 about 90 s
- Flow rate: about 30 l/h, low flow-dependence
-
Shaft length: standard 175 mm
- Connection: Modbus RTU with M12 male
- Material: PVC-U, stainless steel 1.4571, semipermeable membrane
| Type |
Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
|
CD7H-M0c |
0.005~2.000 |
0.001 |
Modbus RTU |
9~30 VD 20~56 mA |
3226620 |
|
CD7N-M0c |
0.05~20.00 |
0.01 |
3226621 |
||
|
CD7L-M0c |
0.5~ 200.0 |
0.1 |
3226622 |
- Model: CD10
- pH range: 1~12
-
Pressure range: 0~1 bar
- Temperature range: 0~50℃
- Automatic temperature compensation
- Response time: T90 about 60 s
- Flow rate: about 30 l/h, low flow-dependence
-
Shaft length: standard 175 mm
- Connection: Modbus RTU with M12 male
- Material: PVC-U, semipermeable membrane
| Type |
Measuring range: ppm |
Resolution: ppm |
Output signal | Power supply | Item number |
| CD10H-M0c | 0.005~2.000 | 0.001 | Modbus RTU |
9~30 VD 20~56 mA |
3426220 |
| CD10N-M0c | 0.05~20.00 | 0.01 |
3426221 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
