OTA Digital Ozone Controller 2 SPST Relays Online Monitoring For Cooling Towers

Ozone(O3) is a colorless to pale blue gasthat in low concentrations gives off an irratating acidic odor. It is a strong oxidizer, stronger than either chlorine or chlorine dioxide.

Ozone reacts quickly and disintegrates into oxygen gas, without the formation of harmful byproducts common to most chlorine chemistries. Ozone is widely used in the drinking water and waste water industries. The DUC2-OZ-H ozone controller can continuously measure and monitor the concentration of the ozone.

 
Features Of The Ozone Controller
 

• Protection level IP66

• Rich output configuration, analog and digital signals

• single-parameter instrument

• RS485 communication, support Modbus protocol
• Provide wide-voltage AC or DC power supply mode
• Support a variety of installation methods
• Time and historical data recording functions
• 128*64 black and white graphic dot matrix screen
• 2 settable 0/4~20mA active current loop outputs
• 2 settable SPST alarm relays
• OTA download technology (Over-the-Air Technology)

 
Applications Of The Ozone Controller

Water plant disinfection process and chlorination control, pipe network and secondary water supply water quality safety monitoring;

Disinfection process control for water production in food, beverage, dairy and pharmaceutical production processes;

Other occasions for ozone disinfection of water.
 

Product Parameters
 

 

 
 
The Suitable Ozone Sensors Recommendation
 

• Model: OZ1.2
• pH range: 2~11
• Pressure range: 0~1 bar
• Temperature range: 0~45℃
• Integrated automatic temperature compensation
• Response time: T90 about 15s
• Flow rate: about 30 l/h, low flow-dependence
• Shaft length: standard 175 mm
• Connection: Modbus RTU with M12 male
• Material: PVC, semipermeable membrane

• Model: OZ7
• pH range: 2~11
• Pressure range: 0~1 bar
• Temperature range: 0~45℃
• Integrated automatic temperature compensation
• Response time: T90 about 50s
• Flow rate: about 30 l/h, low flow-dependence
• Shaft length: standard 175 mm
• Connection: Modbus RTU with M12 male
• Material: PVC-U, stainless steel 1.4571

• Model: OZ10
• pH range: 2~11
• Pressure range: 0~1 bar
• Temperature range: 0~45℃
• Integrated automatic temperature compensation
• Response time: T90 about 15s
• Flow rate: about 30 l/h, low flow-dependence
• Shaft length: standard 175 mm
• Connection: Modbus RTU with M12 male
• Material: PVC, semipermeable membrane