Horizontal 5 Axis Dental Milling Machine Table Dental Mills

After two years R&D, Yucera launch a newest design splited dental milling machine:

1. -Suitable for zirconia blocks , PMMA, Wax and Composite material;
2. -Horizontal processing-speed can be increased by nearly 20%;
3. -Simple maintenance- When the all-in-one machine fails, the after-sales maintenance is more complicated. The seperated equipment only needs to replace the processing system to complete the update and maintenance;
4. -Tool detection sensor with 2um
5. -24hours on-line technical support
6. -Include hyperdent(free)

Technical parameter for 5 axis milling machine:

Horizontal processing VS Vertical machining:
1.Based on the original stable vertical machining, the horizontal milling machine
puts the center of gravity lower.

2.Vertical and horizontal processing are both cradle processing (Suitable for small precision parts processing).
There is not much difference between these two in the layout
and processing mode, but due to the excellent stability of horizontal processing, the speed can be increased by nearly 20%

Cleaning and maintenance after processing:
Check the dust system regularly, preferably for two to three days, insert the trachea pipe into the hole behind the vacuum cleaner, press the dust key and suck.

1. Knife setter 2.Tool library 3.Blank fixture and rotating shaftA 4.Axis of rotationB 5.Blowpipe 6.Spindle

1.BUTT JOINT WITH CUTTING MACHINE 2.NETWORK POT 3.POWER SWITCH

4.POWER CONNECTION 5.BUTT JOINT WITH HOST 6.BAROMETER 7.AIR INLET 8.VACUUM PORT