Double Head Grade 10.9S Busbar Joint Torque Bolt with Galvanized
Double Head Grade 10.9S Busbar Joint Torque Bolt with Galvanized
Features
Installed in joint for insulation
Material: 8.8 grade high tensile steel
Size and color can be customized
| Model | Class | Size of Square Nut | Thread Length | Torque Force | Color |
| M12*115 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*120 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*125 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*130 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*140 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*165 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M |
Yellow/White Galvanized |
Installation Guideline Of Busduct Joint
Step1:dentify the correct joint stack (either 4W or 5W) and its phase orientation before Busduct joint pack installation
Step2: Align and connect both busduct terminal with joint stack connector.
Step3:Joint stack stopper acts a guideline to ensure a full contact surface of the overlapping conductors.
Step4: Tighten the double headed bolt by using socket wrench untile the outer head shear off.
Step5:Place joint pack covers on both sides of the busduct joint section and tighten all the bolts and nuts with socket wrench.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.