Commercial 20000 Egg Single Stage Incubator Electric Heating Poultry Hatchery Setter for Farms

20000 Egg Single Stage Incubator - 220V 110V 380V Electric Heating Poultry Hatchery Setter

The ELT-20000S is a commercial single stage incubator that sets one batch of 20000 chicken eggs per cycle. It is built for hatcheries that work in hot, dusty places with unstable power and need a stable hatch rate with little supervision.

Problem

Commercial hatcheries lose money when eggs fail to hatch. In many regions the power supply swings between 220V, 110V and 380V, dust and heat wear out heaters and fans, and workers cannot watch the machine around the clock. The result is uneven temperature, low hatch rates and costly downtime.

Cause

Many low cost incubators use one fixed voltage, a thin resistance wire heater and a light duty fan. When voltage drops the heater weakens, when dust builds up the fan overheats, and when ambient temperature rises the inside temperature drifts. Every one of these faults lowers embryo survival.

Solution

The ELT-20000S fixes these issues with three engineering choices: a wide range power module that accepts 220V, 110V and 380V input; a electric heating element with self limiting stable output; and an industrial grade axial fan behind a dust filter. A fuzzy logic controller holds temperature within +/-0.1C and humidity within 2%RH and raises an alarm on any drift.

Application

This single stage setter is used in commercial hatcheries, breeding farms and poultry programs. It suits chicken, duck, goose, quail and turkey eggs by changing the tray type.

How It Works

Eggs are loaded on trolleys and set in one stage. The controller compares the temperature and humidity sensor readings with the target curve and drives the electric heater, the damper and the humidifier to hold the set point. The turning motor tilts the trays to 45 degrees every two hours. Filtered fresh air enters and stale air leaves through an exhaust duct, so oxygen is replenished and heat is removed at the late stage.

How to Choose

Choose capacity by multiplying your weekly chick target by the incubation period. Pick a machine that matches your local voltage. Check the heater type, the fan grade and the cabinet insulation, and make sure spare parts such as heater, fan and sensor are easy to replace locally.

Application Scenarios

• Commercial hatchery with a 20000 egg batch
• Breeding farm that needs steady weekly output
• Regions with unstable or multi voltage power
• Hot and dusty farm environments

FAQ

Q: What is the capacity?
A: 20000 chicken eggs; other egg types by tray.

Q: Does it support my local voltage?
A: Yes, it accepts 220V, 110V and 380V.

Q: What is the power consumption?
A: About 4.0 kW working, around 18 kWh per 24 hours at normal ambient temperature.

Q: What is the warranty?
A: One year on all spare parts with free technical support.

Q: How do I order?
A: Contact us with your capacity and voltage, we will quote and arrange shipment.