Single Wire Fully Automatic Chain Link Fencing Machine Length 3m Or 4m

Fully Automatic Chain Link Machine has the below advantage:
1. It highly saved labor costs, at the same time, increased the work efficiency.
2. It can keep on working more than 72 hours.
3. As time goes by, the mould and the machine will matched very well, as a result, the machine will work more
and more fast. (this video link can show you the old machine work speed: https://youtu.be/NweeubvH3QK)
4. Easy machine principle, low fault rate, half a day is enough to teach your worker.
5. Quickly service: Once your machine has problem, we will give you the solution within 10 minutes on work
days, and 8 hours on weekends.

Chain Link Machine Detail Show
1. Serve Motor
All of our machine using Serve Motor, which can give you the below different work states:
A: Accurate control speed and position, accurancy can not be changed by the speed adjustment.
B: Keep the stable-speed running and powerful torque condition, the high production is ensured.
C: At the high-speed running and powerful torque condition, the high production is enqured.

2. Edge
All of our machine can work with both Barb Edge and Knuckle Edge. This video can show you our machine is working on one
side barb and the other side Knuckle: http://youtu.be/1lopAfQuQRk.

3. PLC
Certainly, Using PLC can make the operate more easy. Moreover, our PLC can give you differant experience when you want to
change something or when your machine has problem. Because all of machine buttons marked number which matched the PLC
inside control number like the below photo:

4. Mould and Straighten Wire Device

5.parameter:

You may also need the Compact Roll to match your machine, if you need, pls feel free to contact us.