SHP Grade 5.8 Microns Graphite Electrode Rod For Making Arc Furnace
High carbon upper and lower graphite electrodes
| Model Number | ultra-high pressure |
| Type | Electrode Block |
| Application | steel making arc furnace |
| Length | 1500 mm to 2700 mm |
| Grade | SHP (Super High Power ) |
| Resistance | 4.8 to 5.8 microns |
| Apparent Density (g/cm3 ) | 1.68 to 1.75 grams per cubic centimeter |
| Thermal Expansion | 1.1 to 1.4 |
| Flexural Strength | 10-14 mpa |
Product Introduction
1.To Place the nipples, first use compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the thread).
2.To connect the electrodes, when there's 20-30mm distance between the two electrodes, using compressed air to clean the two extremes.
3.Connector locations should be selected c-map.
4.When use the wrenches to connect electrodes, should be fully tighten to specified torque.
5.To avoid electrode broken, please remove the insulating material in the furnace.
6.To avoid electrode broken, pls. place the big block in the lower and smaller block at the upper. We can manafacture and export graphite electrodes in different grade ,shape and dimension.Whenever you need it ,please feel free to let us know.we promise you the top quality and lower price.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.