6m3 850kg steel frame Six cube Reck Slurry Mixers
Six-cube Slurry Mixer
Application:
The Six-cube Slurry Mixer (refer to the photo and drawing) is especially used to mix the lime, Steam Aerated concrete arenaceous powder, water completely to form slurry.
Structure:
Mortar mixer is composed of helical gear reducer, channel steel frame, shaft and mixer, etc
Helical gear reducer should be installed in a vertical position
Roller and mixer are welded together.
Working principle:
The mortar mixer is used to mix the lime, Steam Aerated arenaceous powder, water completely to form slurry. Mixer is driven by helical gear reducer, which rotate counterclockwise from up to down.
Technical parameter:
| Size (Maximum) | ||
| Lenth | 2500 | mm |
| Width | 1400 | mm |
| Height | 2775.5 | mm |
| Weight | 850 | kg |
| Helical gear reducer: | ||
| Model | CRM97-59.7-Y-5.5-V1 | |
| Power | 5.5 | KW |
| rotate speed | 1440 | r/min |
| Speed ration | i=59.7 | |
Maintenance and repair
Maintenance:
Please make sure that there is no slurry in the basin before stop working. Otherwise, the mixer may be damaged because of slurry sedimentation.
Please check lubricating oil of the reducer and to fill timely. Normally, lubricating oil is expected to be changed after six monthsTo clean the mixer and its basin after every day’s work.
Repair:
Please check all fasteners to avoid any possible loose and change worn parts.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.