Small Size Pole Mounting Type Telecom Equipment Enclosure With One Front Door

1.Enclosure Description

The Telecommunication equipment cabinet is small form, low profile outdoor telecommunication cabinet which is applicable for installation of 6U equipment.

2.Technical specification

2.1 General

The outdoor cabinet, for ETSI market, is intended to be used as enclosure for one 1U, or 2U, or 3U, or 4U (depending on the RL type) indoor unit of the Radio Link and/or other telecommunication equipment.

2.2 Functional design

• The outdoor cabinet supports the following functions:
• Standard 19” rack mountable option
• 6U space inside the cabinet for installing telecom equipment
• Cable interface: support for mast installation
• Grounding: the outdoor cabinet has a connection for protective earth.
• Cable bushings (holes):there are 6 (six) cable bushings (holes), in the bottom of the cabinet, for the following types of cables

• Ingress protection of enclosure:The cabinet is made of aluminum alloy and complies with Ingress Proof according to IP55 class

• Alarms:The cabinet supports fan and door open alarms

• Cooling (fans):Heating system containing 1 Heater, 1 Heater Fan and thermostat

3.Cabinet accessories

• 2 x Internal fans
• 2 x External fans
• 1 x Heater including heater fan
• 1 x Thermostat
• 1 x Control board
• 2 x Temperature sensors on the control board

4. Mounting options

The outdoor cabinet has two mounting options:

• To be mounted on the wall
• To be mounted to a pole (mast) with a diameter of 50 – 120mm with adapters

5.Environmental requirements

Temperature:

Low temperature -45° C

High temperature +45° C

Relative humidity of 8 – 100% Rh

Solar radiation

Solar intensity of max 1120W/m2

Wind

The equipment shall withstand following wind speed:

Operational: 50m/s

Survival: 70m/s

6.Cabinet Dimensions

7.Cabinet Package

Wooden case with pallets or carton box with pallets