423-22-22461 4232222461 Seal For Komatsu Dump Trucks Wheel LoadersHM250 HM300 HWA350 WA380 WA380Z WA400 WA430M300TN

423-22-22461 4232222461 Seal For Komatsu Dump Trucks Wheel LoadersHM250 HM300 HWA350 WA380 WA380Z WA400 WA430M300TN

Material Details:

Oil Seal Features:

1). Excellent durability and flexibility of use.

2). The specially designed rope enhances durability and length stability.

3). Excellent heat resistance, oil resistance and abrasion resistance.

4). The display is stable during high-speed rotation.

5). Due to the excellent special frame, heat resistance, oil, fatigue, aging and friction.

6). High power, fast speed, long service life, low distortion and less space.

Measures For Oil Leakage Due To Inadequate Oil Seal:
1. Master and recognize the basic knowledge of fake and inferior products, and purchase high-quality and standard oil seals.
2. During installation, if the roughness of the outer surface of the shaft diameter is low or there are defects such as rust, burrs, etc., smooth it with a fine emery cloth or whetstone; apply clean engine oil or grease to the lip of the oil seal or the corresponding position of the shaft diameter. Apply sealant to the outer ring of the oil seal, wrap the key way on the shaft with hard paper to avoid scratching the lip of the oil seal, and use a special tool to rotate and press the oil seal inwards. Do not smash the hard seal to prevent deformation of the oil seal or squeeze the spring and fail; If there is lip cuffing, the spring falls off and the oil seal is skewed, It must be removed and reinstalled. It should be noted that when the shaft diameter is not worn and the spring force of the oil seal spring is sufficient, do not tighten the inner spring without authorization.
3. The oil seals applied to machinery generally have to be inspected, maintained and maintained when the general working conditions are poor, the ambient temperature difference is large, the dust is excessive, and the vibration of the machine tool frequently changes the stress condition of the machine parts.
4. If the shaft diameter and bearing are seriously worn; The rubber seal oil is aging or the spring is invalid, etc., repair and replace the corresponding parts in time.

Related Parts:

Welcome OEM/ODM order. Please click "ask a question", or call us if you have a parts need that you do not see listed here.