15% Moisture Biomass Sawdust Shaving Wood Chips Dryer
15% Moisture Biomass Sawdust Shaving Rotary Wood Chips Dryer
The new type of rotary wood chips dryer is shaped as a horizontally inclined rotating cylinder. Wet wood chips are feed at feed port and discharged at the output port. In direct-type rotary dryer (cylinder drier), hot air moves through the cylinder in direct contact with the material in the dryer, either downstream or against the direction of its flow. The wood chips rotary dryer is equipped with scatters equipment, make wood chips fully touched with the hot air, so that has a very good drying effect.
Working principle of rotary wood chips dryer
Rotary wood chips dryer is consists of a heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts. For the installation process, the rotary drum dryer should slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary drum dryer under gravity. Material to be dried enters the rotary drum dryer, and as the rotary drum dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer, passing through the hot gas stream as it falls.
Technical Parameters of rotary wood chips dryer
| Model | Capacity(t/d) | Vaporization capacity(t/h) | Early moisture(%) | Final Moisture(%) | Drying Temperature(℃) | Total motor power(kw) | Total weight(kg) | Cover Area(m²) |
| TYGT1210 | 44.0-19.5 | 0.565 | 35-50% | 12-15% | 270±30℃ | 28 | 13500 | 5m×15m |
| TYTG1409 | 46.5-20.5 | 0.595 | 34 | 15500 | 5m×15m | |||
| TYGT1615 | 88.0-39.0 | 1.130 | 45 | 19500 | 6m×22m | |||
| TYTG2010/3 | 144.5-63.5 | 1.850 | 78 | 25000 | 8m×18m | |||
| TYTG2210/3 | 154.0-67.5 | 1.976 | 85 | 27000 | 8m×18m | |||
| TYTG2510/3 | 193.0-83.5 | 2.427 | 110 | 35000 | 10m×18m | |||
| TYTG2512/3 | 227.0-100.0 | 2.912 | 125 | 38000 | 10m*20m | |||
| TYTG2912/3 | 268.0-120.0 | 3.432 | 135 | 43500 | 10m*22m |
Features of rotary wood chips dryer
- 1. Our rotary wood chips dryer is designed with an anti-sticky drum-wall and assembled the material-lifting board.
- 2. This type of wood chips rotary dryer, what worth mentioning is that our rotary drum dryer features convenient installation and transportation as a result of its flange connection.
- 3. This large-sized wood chips rotary dryer is primarily composed of feeder conveyor, heating furnace, drying device, and air intake and air outlet device, and more.
- 4. Our wood chips rotary dryer has the features of low noise, little pollution, and good drying effect.
-
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.