American standard Wood Pallet Board Chamfer Machine

When wood pallet board chamfer machine is running, workers place the whole piece of wood to be processed on the operating table. When placing, pay attention to accurately placing the wood into the feeding trough to prevent displacement of the wood during the movement; the wood will be moved at a uniform speed along with the chain. Advance to the cutting blade, the blade rotates and mills the edge; the wood milled out of the side will follow the running chain and push to the finished product discharge slot, and the milling process is completed.

Parameter of american standard wood pallet board chamfer machine

Performance characteristics of wooden pallet bottom beveling machine

1. High precision: the cut wood material has vertical, smooth cutting surface and consistent size
2. Low cost: labor saving, convenient size adjustment
3. Easy to operate: the equipment has a simple structure and can be operated by one worker
4. High safety: The cutting blade cannot be touched by the worker's fingers during the entire operation
5. Adjustable size: you can enter different values ​​to cut off wood materials of different lengths

Debugging and precautions in use of wooden pallet bottom beveling machine

1. Pay attention to placing the wood pallet board chamfer machine on a stable ground during installation to avoid malfunctions due to unstable placement of the equipment during operation.
2. Connect the power cord before use, run it without load, check whether the fasteners are loose, whether the machine is running normally, if there is any abnormality, perform repair and debugging.
3. Check whether the cutting saw blade is tight before starting the machine to run; if an abnormality is found during operation, press the emergency stop switch to perform shutdown inspection.
4. To process wood of different specifications, you need to set and enter different values.
5. During the operation of wood pallet board chamfer machine, do not remove the protective cover of the cutting blade, do not touch the cutting blade manually, pay attention to safety.