63 Ton Fully Automatic Aluminium Foil Container Making Machine with Wrinkle Wall and Smooth Wall Moulds on One Press Line
The LK-T63 is a fully automatic aluminium foil container making machine built around a 63-ton press. The press body uses a C-frame structure, and the lubrication system runs on lithium-based esters. With 3-cavity moulds, it produces the small and medium containers used for takeaway boxes.
Wrinkle wall and smooth wall moulds both run on the same press line. One complete line consists of a 950/1450 decoiler, the T63 press, a mould lifter arm, safety doors, a scrap aspirator, a control cabinet, and a 3-way stacker. A Mitsubishi PLC and touch screen are housed in the control cabinet.
Boxes produced on the line are used for restaurant takeaway, catering, bakery, and food packing. Square, round, and irregular shapes are produced by changing the mould, and moulds can be customized to customer samples.
| Item | Specification |
|---|---|
| Press Capacity | 63 ton |
| Installed Power | 19.8 KW |
| Stroke | 240 mm fixed |
| Working Speed | 35–70 strokes/min |
| Foil Feeding | Servo motor controlled |
| Feeder Level Adjustment | Electric |
| Feeder Level from Workplate | 150 mm to 300 mm |
| Maximum Foil Passage Width | 950 mm |
| Workplate Dimension | 1100 x 900 mm |
| Slider Dimension | 480 x 360 mm |
| Ram Adjustment | 80 mm |
| Maximum Mould Dimension | 1100 x 900 mm |
| Solenoid Valves with Adjustable Pressure | 12 |
| PLC | Mitsubishi |
| Main Motor | ABB |
| Low Voltage Electrical | Schneider |
| Main Frame | C frame |
| Lubrication | Lithium-based ester oil lubrication |
| Total Weight | 13,500 KG |
Line composition: Decoiler + Press T63 + Scrap Aspirator + Control Cabinet + 3-Way Stacker.
| Item | Specification |
|---|---|
| Mould Types | Wrinkle wall and smooth wall container moulds on the same press |
| Cavity Range | Single cavity to multi-cavity, customized |
| Edge Rolling Styles | Full edge rolling, folded edge rolling, reverse edge rolling |
| Heat Treatment | Vacuum heat treatment |
| Hardness | HRC 58–62 |
| Processing Accuracy | ±0.01 mm |
| Machining | WEDM-LS (low speed wire EDM) |
| Guider & Sleeve | Imported from Japan |
| Raw Material | DC53, SKD11, Cr12, Cr12MoV, 45# |
| Minimum Forming Stroke | 30 million strokes |
- Applicable to wrinkle wall and smooth wall container moulds
- Automatic counting
- System automatically alarms and displays faults on the touch screen
- 60 sets of mould parameter storage
- Quick mould changing device
- Safety doors stop the press automatically when a door is opened by hand
- Mould lifter arm on the platform for mould loading and unloading
- 63-ton press with 3-cavity moulds fits the small and medium container sizes used for takeaway boxes.
- Wrinkle wall and smooth wall moulds run on the same press line, so one line covers both box styles.
- Square, round, and irregular box shapes are produced by changing the mould, and moulds can be customized to samples.
- Complete line from decoiler to 3-way stacker; feeding, pressing, scrap removal, and stacking are continuous.
- Servo-controlled feeding with the feeder level adjustable from 150 mm to 300 mm above the workplate.
- Maximum foil passage width is 950 mm, so 950 mm foil runs without extra slitting.
- Working speed is 35 to 70 strokes per minute and is adjustable on the panel.
- Mitsubishi PLC, ABB main motor, and Schneider low voltage components are used in the control system.
- Up to 60 sets of mould parameters are stored in the panel, which shortens setup for repeat orders.
- Safety doors with automatic stop protect the operator during production.
Q: Can this machine produce takeaway boxes?
A: Yes. Small and medium aluminum foil containers suit the 63-ton press with 3-cavity moulds. Box size follows the mould, and moulds can be customized to customer samples.
Q: What does "wrinkle wall and smooth wall on one press line" mean?
A: Both mould types fit the same press. You switch wall type by changing the mould, so takeaway boxes with a folded wall and boxes with a smooth wall are produced on one line.
Q: How many boxes can it make per minute?
A: The catalog working speed is 35 to 70 strokes per minute. With a 3-cavity mould that is a theoretical 105 to 210 boxes per minute, calculated as strokes per minute multiplied by 3 cavities. Actual output depends on box size, foil thickness, mould condition, and operating practice.
Q: How long does a mould change take?
A: Moulds are loaded with the platform-mounted lifter arm, and the machine has a quick mould changing device. Up to 60 sets of mould parameters are stored in the control system, so repeat orders are recalled from the panel. Exact changeover time depends on mould size and operator experience.
Q: Do you supply the moulds as well?
A: Yes. Moulds are supplied in wrinkle wall or smooth wall type, from single cavity to multi-cavity, and can be customized. Mould hardness is HRC 58–62, processing accuracy is ±0.01 mm, and vacuum heat treatment is used.
Q: What is the press capacity and installed power?
A: Press capacity is 63 ton and installed power is 19.8 KW, with a 240 mm fixed stroke. The control system uses a Mitsubishi PLC, ABB main motor, and Schneider low voltage components.
Q: How is operator safety handled?
A: Working areas are enclosed by safety doors. If a door is opened by hand during production, the machine stops automatically, and the fault is shown on the touch screen panel.
Q: What about installation and support?
A: LIKEE provides overseas installation service, pre-sales and after-sales support, and one-stop service for aluminum foil container projects.
Video: LK-T63 aluminium foil container making machine in operation.
Aluminium foil takeaway containers produced on the LK-T63 press line.
Square and round aluminium foil containers for food packing.
Quality certificate for LIKEE aluminium foil container making machines.
Customer site installation of the LK-T63 aluminium foil container making machine.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.