FUJI SMT Placement Machines KE - 3020V Flex Chip With Second Hand
 
Description:
The KE-3020V is JUKI's latest leading-edge technology for improved flexibility and production quality. It supports both electronic and mechanical tape feeders and can handle boards up to 610 x 560 mm. With its multi-nozzle laser head, the KE-3020V can achieve a rated IPC9850 speed of 17,100 cph and is capable of a component placement range from 01005 to 74 x 74 mm.
 
Features:
♦ Single Gantry, 1 Head per Gantry
   Ideal for high-mix, high-changeover, environments.
♦ 6 Nozzles per Gantry(plus IC Head on 3020V)
   It can place 6 components simultaneously and center on the fly.
♦ High Accuracy Low Noise Ball Screw Drive With Linear Encoders
♦ High Accuracy Laser Align Component Centering
   Select centering method based on component type, ship, size and material.
♦ High Speed Strobing Vision Centering System(3020V only)
   On-the-flying-vision centering increase placement speed by eliminating wasted stops over camera.
♦ Quick Change Feeder Trolleys
   Supports both electronic and mechanical feeder trolleys.
♦ Standard POP Capacibility
   Package-on-package assembly is fully supported using either linear or rotary fluxer units. 
 
Specifications:

SMT Application:
Surface mount technology, SMT and its associated surface mount devices, SMDs considerably speed up PCB assembly as the components simply mount on the board.
Look inside any piece of commercially made electronic equipment these days and it is filled with minute devices. Rather than using traditional components with wire leads like those that may be used for home construction and kits, these components are mounted onto the surface of the boards and many are minute in size.

♦ Good mechanical performance under shock and vibration conditions. (Partly due to lower mass, and partly due to less cantilevering.)

♦ Lower resistance and inductance at the connection; consequently, fewer unwanted RF signal effects and better and more predictable high-frequency performance.

♦ Better EMC performance(lower radiated emissions) due to the smaller radiation loop area(because of the smaller package) and the lesser lead inductance.

♦ Fewer holes need to be drilled. (Drilling PCBs is time-consuming and expensive.)

♦ Reasonable initial cost and time of setting up for mass production, using automated equipments.