Double Suction Arm 2*143 M3/H Laser Soldering Fume Extractor
Double Ducting Suction Arm 2*143 M3/H Fume Extractor For Laser Soldering Machine
Features:
1 Activated carbon deodorization
2 Multilayer filter design,make sure more thorogh purification
3 Noise canceling design,quieter working place
4 Adopt impoter draught fun
5 Filter element failure alarm
Instructions:
| Power(W) | 80 |
| Dimension(mm) | 340*265*480 |
| Air Flow(m3/h) | 220 |
| Noise(db) | <57 |
| Voltage | 110/220 |
| No-load speed(r/min) | 5800 |
| Wind spped(m/s) | 17 |
| Weight(kg) | 11 |
| Negative pressure(pa) | 1800 |
Advantages:
1. Long service life, low cost, continuous 24-hour work, can use 40000 hours (i.e. normal use for eight to ten years)
2. Multi layer filtration, rapid purification, filter failure sound and light alarm.
3. High negative pressure, high flow, small volume, light weight, easy installation, flexible filter replacement.
4. Various types of materials make you have more choices to smole hood,silicone hood acrylic hood alloy hood
5. 3 layers filters can be separate replace,high efficient sterilization make work place safer
FAQ:
Q: What if it were damaged in transit?
A: We are in full charge of it. You don't need to assume any responsibility.
Q: Is it difficult to install the product? Do you need a professional to install it?
A: Small equipment refer to the manual, connected to the power supply can be used. No professional installation is required. Large equipment XL-3000/XL-5000 will be installed by professional personnel on site.
Q: What is the smoking hood made of? Can it withstand high temperature? What are their characteristics?
A: Smoking cover silica gel, acrylic, aluminum alloy a total of three materials; The flexibility of silica gel material can withstand the temperature of about 400 degrees, and the cigarette butts are not bad. And acrylic material light transmittance is good, but not high temperature resistance; Aluminum alloy is light, beautiful, high temperature resistant, high price.
Q: Can I return it if the purification effect is not good?
A: If you choose the right model, the effect is certainly no problem. Of course, if the model we recommend has no effect, or the product quality is problematic, of course, you can return it, this is your right (the packaging is better not damaged, so as not to affect the second sales).
Q: Under what circumstances can I return it?
A: If the same quality problem has not been solved for more than 4 times, we can return it.
Q: Under what circumstances are returns not allowed?
A: Damaged appearance or packaging, beyond the probation period (usually 3 days) is not allowed to return.
Product part picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.