WWTP Screw Press Dehydrator
Stainless Steel Multi Disk Cake Sludge Dewatering Screw Press Dehydrator WWTP
Thickening: When the shaft is driven by the screw, moving rings around the shaft move up and down relatively. Most water is pressed out from the thickening zone and fall down to the filtrate tank for gravity;
Dewatering: The thickened sludge moves forward continuously from the thickening zone towards the dewatering zone. With the pitch of the screw shaft thread getting narrower and narrower, the pressure in the filter chamber increases higher and higher. In addition to the pressure generated by the back-pressure plate, the sludge is greatly pressed and dryer sludge cakes produce;
Self-cleaning: The moving rings rotates continuously up and down under the pushing of the running screw shaft while the gaps between the fixed rings and moving rings are cleaned to prevent from clogging that happens frequently for traditional dewatering equipment.
Screw Press Dehydrator Tech
| Model | DL101 |
| DS capacity kg/h | 3-5 kg/h |
| Sludge capacity m3/h(2-50g/L) | 1.5-0.1 |
| Spiral diameter mm | ￠100*1 |
| Discharge Distance mm | 215 |
| Size L*W*H mm | 1816*756*1040 |
| Net.Kg | 200 |
| Run Kg | 290 |
| Power Kw | 0.2 |
| Washing Q L/h | 24 |
Screw Press Dehydrator Feature
- Automatic continuous operation
- Compact design with flocculation and dewatering
- Low power and water consumption
- Low operation cost
- No filter cloth, no clogging
- No need for sludge thickener
- Easy operation and maintenance
- No vibration and noise
Screw Press Dehydrator Applications
- All range of industries ETP & STP
- Faecal Sludge management
- Primary sludge and biological sludge dewatering
- Wastewater treatment plants – New / Existing
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.