Multi 10 304 316 Liquid Multi Bag 40m3/Hr Sanitary Filter Housing
Dagyee Multi 40 Cartridge Filter Housings
Multi 40 Cartridge Filter Housings
Adopt to mechanical polishing,material liquid touch area Ra<0.4um,absolute health level of polishing , can select all series electrolytic polishing.
- It can increase the vent hole and dreain hole diameter Effectively , and can connect 8mm pipe.
- Drain valve independent from the exhaust valve thread joint sets and pagoda,operating is more convenient.
- Adopt to hing segmented clamp ,20% higher than an ordinary card hoop pressure,maximum pressure up to 1.0Mpa.
- Supporting feet adopt to strengthening threaded,not easy sliding teeth;Install a adjustable nut at the bottom of the leg , filter's height can be adjustment .
Multi 40 Cartridge Filter Housings Specification
| Model | DYG-40-40‘’ |
| Material | SUS304 SUS316 |
| Applicable Filter Cartridges | Industrial PP Filter Cartridges String Wound Filter Cartridges Stainless Steel Filter Cartridges |
| Filtration accuracy | 0.1-200UM |
| Connection Type | With a clamp /BSP female |
| Surface treatment | Mirror reflection |
| Housing Dimensions (mm) | Ø550*1450 |
| Max. Flow Rate (m3 /h) | 40 |
| Max. Operating Conditions (bar/°C) | 10/150 |
| Inlet/Outlet (flange) | 1 1/2''/OEM |
| Length of Filter Cartridge | 40'' |
| No. of Filter Cartridges | 40 |
| Max. Cartridge Outside Diameter(mm) | Ø60 |
Material: SUS304L, SUS316L
Cartridge Capacity: 1element, 3element.. 160element
Connection Available: Flange, female thread
Cartridge Configuration Accepted: 222/Fin, DOE
Technical Parameters of Multi 40 Cartridge Filter Housings
1.Seal type: O-rings and flat gasket
2. Sealing material: nitrile rubber(chemitum), silicone, fluorine rubber, usually use silicon rubber seal
3. Filter interface: the threaded, clamp(hoop), GB, HG, DIN, ANSI, JIS standard flange
4. Filtration accuracy: 1μm - 100 μm
5. Body material: SS304/SS 316
rubber seal Filter interface: the threaded, clamp(hoop), GB, HG, DIN, ANSI, JIS standard flange Filtration accuracy: 1μm - 100 μm
Body material: SS304/SS 316
Multi 40 Cartridge Filter Housings Features:
1.Inlet & outlet size is 1/2", 3/4". 1" for easy installation.
2. Working pressure 8kg/0.8Mpa, 10kg/1Mpa is supported.
3. Use the tap water pressure to provide power, no power consumption.
4. Wall-mounted, counter-top, very simple installation.
5. It is suitable for using in the water mater switch, for the pre filtration system and RO system protection.
6. Resistance to strong acid and alkali.
7. Low cost, it fits different kind of filter elements.
Multi 40 Cartridge Filter Housings Characteristics
1.High filtration precision, uniform pore size filter.
2.Small filtration resistance, flux, interception capability, long service life.
3.Filter is clean and no second pollution to the filter media.
4.It also can filter acid, alkali and other chemical agents.
5.High-intensity,heat-resistant,deformation resistance.
6.Low price, low running costs, easy to clean, filter can be replaced.
Multi 40 Cartridge Filter Housings Application
Water Treatment, RO system;
·Pharmaceuticals, API, Biologics;
·Food and Beverage, Wine, Beer, Mineral Water, Distillation Equipment;
·Paints, Inks Plating Solutions;
·Process Chemicals and Electronics Industry ;
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.







