Polymer Filters Sludge Dewatering Press Wastewater Sludge Screw Press

Sludge dewatering equipment is not intended to treat the sludge or liquid but; it only separates the liquid components & solid components so it will get easier & cost effective to handle the separate phases of the disposal. Once the final sludge has been dewatered, then liquid is treated in ETP/STP & solid sludge is disposed.

The main purpose of Sludge dewatering machine is to minimize the handling and disposal. Sludge dewatering press is the most cost effective method of dewatering, and hence helps to sustain the environmental objectives of company.

Screw Press Dehydrator Features

• Low Running Cost
• Power-use: less than 5% of centrifuge
• Water-use: less than 0.1% of belt filter press. Polymer: saving around 60%
• Room: saving more than 60% of the investment for dehydration room
• Non-clogging
• Self-cleaning with small amount of water
• Suit for Oily Sludge

Screw Press Dehydrator Technical Table

Screw Press Dehydrator Application

• Simple arrangement
• Low Power Consumption
• Simple and short start-up and shut down procedures
• Continuous operation
• Hence continuous output can be obtained
• Process can be automized
• Only electricity and water supply for cleaning is required, and that too in less amount
• For a multi-channel machine, one or more channels may be removed for maintenance purposes, while the machine with the remaining channels may still be operated.
• No clogging. Cleaning is automized and is easy.
• Long life of discs.
• No external lubrication system is required.
• Flocculator built in the Screw press

Contact us