Pneumatic ST1000 type water well drilling rig with fast drilling speed

Price Negotiable

Price: 35000 USD-45000 USD

MOQ: 1 set

Delivery Time: 15-20 days

Brand: Shitan

Product Description

Pneumatic ST1000 type water well drilling rig with fast drilling speed

ST 1000 Pneumatic Borewell Machine Product Information

It is mainly suitable for drilling water wells,agricultural irrigation wells, geothermal air conditioning holes and other wells, especially suitable for water intake projects in mountainous areas and rock formations. . The efficiency is ten times higher than that of traditional rotary drilling rigs, and the economic benefits created for users are extremely considerable.

ST 1000 Pneumatic Borewell Machine Main Technical Data:

Model		Shitan ST 1000
Max drilling depth	M	1000
Drilling diameter	mm	105-500
Air pressure	Mpa	1.2-3.5
Rod length	m	6
Rod diameter	mm	102-114
Main shaft pressure	T	6
Lifting force	T	45
Power head stroke	M	47
Max rotary torque	Nm	22000
Max rotary speed	r/min	80-160
Secondary winch liftng force	T	3
Jacks stroke	m	1.5
Moving speed	km/h	2.5
Uphill angle	Slope	21°
Weight of the rig	T	18
The engine	242KW / 6 cylinder
Overall dimensions	620022002500mm
Working condition	Loose layer and bedrock
Drilling method	Hydraulic rotary, down-the-hole impactor

ST 1000 Pneumatic Borewell Machine Main Advantages"

1. It improves drilling efficiency and reduces labor intensity With hydraulic automatic feeding mechanism.

2. It can be achievedwithout stopping to change rods, easy to operate, safe and reliable with ball clip holding mechanism orhydraulic chuck.

3. It hashole bottom pressure gauge to be easy to master the situation in the hole.

4. It also has advantage of Compact structure,concentrated handle, small footprint, light weight, strong decomposition, easy tomove. It can be operated in plains and mountainareas.

Pneumatic Borewell Machine maintenance

Our machines can be applied to various countries in the world, suitable for various scenarios, various geological scenarios including deserts, swamps, grasslands, mountains, orchards, etc.

Correct maintenance and repair is very important to maintain the technical performance, service life and reliability of the drilling rig. Daily maintenance and repair are carried out before and after the shift every day. The main contents are as follows:

(1) check whether all fasteners are loose.

(2) check whether the spindle rotates flexibly.

(3) check whether all control switches are normal and flexible.

(4) check whether the oiler is normal, whether the oil quantity is qualified and whether the oil quality is qualified.

(5) after use, it shall be cleaned in time to remove dirt and clean up.

(6) remove rust spots on rusty parts and apply rust inhibitor.

(7) there is a filter screen at the pipe joint in the gas path, which can not be removed at will, but also cleaned regularly.

(8) the shell of the drilling rig is made of aluminum alloy. It is strictly prohibited to fall, smash and press.

(9) disassemble and clean regularly, clean all parts in the motor housing and add lubricating oil. Parts with severe wear shall be replaced. Generally, the two handles do not need to be removed, but the air pipe connector can be removed to clean the filter screen.