High Drilling Efficiency 200 Meters Depth Borehole Drilling Machine For Water Well
High Drilling Efficiency 200 Meters Depth Borehole Drilling Machine For Water Well
GK200 is a lightweight shallow hole rig which can be drilling depth max 200M,diamter 75-300mm,with oil pressure feed.Mainly used for geological general investigation and exploration,road and tall buliding foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and driect grouting,civil wells and earth temperature entral air-conditioner,etc.
GK 200 Meters Borehole Drilling Machine Tech Data
| GK 200 Borehole Drilling Rig | |
| Drilling diameter(mm) | 75,91,110,130,150,300 |
| Drilling depth (m) | 200,150,100,70,50,30 |
| Drill pipe diameter (mm) | 42,50 |
| Drilling angle(°) | 90~75 |
| Equipment size(L * B * H) | 1730 * 860 * 1360 (mm) |
| Rig weight (except engine) | 700 |
| Mobile device | |
| Moving length | 350mm |
| Leave distance | 300mm |
| Gyrator | |
| Spindle speed (four gear) (r/min) | 115,230,505,1010 |
| Spindle travel(mm) | 450 |
| Spindle no-load lifting maximum moving speed(m/s) | 0.05 |
| Spindle no load drop maximum movement speed(m/s) | 0.067 |
| Spindle maximum feed pressure(KN) | 15 |
| Spindle maximum lifting force(KN) | 25 |
| Spindle maximum output torque(KN• m) | 1.5 |
| Winch assembly | |
| Winch maximum lifting force (single rope) | 20 |
| Reel speed (r/min) | 20,39,85,170 |
| Reel circumferential speed(m/s) | 0.172,0.345,0.738,1.476 |
| Reel diameter(mm) | 140 |
| Wire rope diameter(mm) | 9.3 |
| Wire rope density (m) | 40 |
| Brake diameter(mm) | 278 |
| Brake band width (mm) | 50 |
| Oil pump | |
| Oil pump type | YBC -20/125 |
| Nominal pressure (Mpa) | 12.5 |
| Rated flow(ml/r) | 20 |
| Rated speed(r/min) | 800-2500 |
| Diesel engine or motor | |
| Diesel engine | 1115 |
| Rated power (KW) | 16.2 |
| Rated speed (r/min) | 2200 |
| Rated pressure(Mpa) | 12.5 |
| Motor type | Y160M - 4 |
| Rated power (KW) | 11 |
| Rated speed (r/min) | 1460 |
GK 200 Meters Borehole Drilling Rig Machine Drill Purpose
1. The Railway , Hydropower, Traffic , Briges , Foundation And Other Buildings In The Engineering Geological Investingation.
2. The Geological Core Drilling , Geophysical Survey.
3. The Small Grout Confucius, Blast Hole Drill.
4. The Small Water Well Drilling.
GK 200 Meters Borehole Drilling Machine Characteristics
1. Adopt Low speed high torque hydraulic motor drive rotary device output torque
2. The advantage of cylinder is promoting more stable, less failure significantly than the motor propulsion.
3. Equip two filter effectively to ensure the safety of diesel engine intake and prolong engine life.
4. It can readily monitor rig hydraulic system pressure and boost pressure to ensure the rig stable and efficient operation.
5.Using well-known brands of multi-way control valve, superior performance, handle centralized, easy to operate.
The water well drilling rig is maintained at different times
The maintenance of water well drilling rig is very important, which can prolong the service life of the equipment, keep the water well drilling rig in a good operation state for a long time, reduce the maintenance cost and ensure the personal safety of operators.
1. Monthly maintenance:
Thoroughly carry out the items required by shift and weekly maintenance.
Remove the chuck and clean the slip and slip seat. Replace in time if damaged.
Clean the filter in the oil tank and replace the deteriorated or dirty hydraulic oil.
Check the main parts and components. If damaged, replace them in time. Do not work with injuries. Completely eliminate the faults occurred in this month.
If the well drilling equipment is not used for a long time, all exposed parts (especially the surface of the processing surface) shall be coated with grease.
2. Weekly maintenance:
Thoroughly carry out the items required by shift maintenance.
Remove the dirt and soil on the tooth surface of chuck and slip.
Clean the oil and mud on the inner surface of the holding brake.
Eliminate faults that occur within this week.
3. Shift Maintenance:
Check whether all exposed bolts, nuts and safety pins are firm and reliable.
Eliminate other faults in the shift.
Check the oil leakage everywhere and deal with it as appropriate.
Check the oil level of transmission, transfer case and hydraulic system oil tank.
Add lubricating oil or grease according to the lubrication requirements.
Wipe the external surface of the well drilling rig equipment, and pay attention to the cleanness and good lubrication of the surface of the well drilling rig base, slide-way, vertical shaft and so on.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.