Lightweight High stability width 3.95m Biaxial Plastic Geogrid
High Stability And Bearing Capacity High Tensile Loads In The Transverse Direction Plastic Geogrid Mesh
Plastic Geogrid Mesh Introduction
Plastic geogrid is mainly manufactured from polypropylene or high density polyethylene, which are all UV stabilized, chemical and biological resistance. The plastic geogrid is mainly used in the construction of roadways, highways, railways, slopes for ground stabilization and subgrade reinforcement. The plastic geogrid is extruded into sheet and then punched into regular mesh pattern and finally stretched. According to the stretched direction, it can be divided into uniaxial plastic geogrid and biaxial plastic geogrid.
Uniaxial plastic geogrid
Uniaxial plastic geogrid, made of high molecular polymer, is extruded into sheet and then punched into regular mesh pattern and finally stretched in the transverse direction. This production can ensure the structural integrity of the geogrid. The main materials of the uniaxial plastic geogrid are high density polyethylene and polypropylene, which are highly oriented and resists elongation when subjected to heavy loads for long period of time.
Biaxial Plastic Geogrid Specification
| project | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
| Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Tensile Strength @2% Strain KN/m | 5 | 7 | 9 | 10.5 | 14 | 16 | 17.5 |
| Tensile Strength @5% Strain KN/m | 7 | 14 | 17 | 21 | 28 | 32 | 35 |
| Roll width | 3.95 or 5.95 meters | ||||||
| Roll Length | 50 meters |
||||||
Plastic Geogrid Mesh Features
1.Resistance to the long term chemical or biological degradation.
2.High stability and bearing capacity to increase service life.
3.High tensile loads in the transverse direction.
4.Prevent the material loss caused by the roadbed distortion and crack.
5.Lightweight for quick installation and low construction cost.
Plastic Biaxial Geogrid Applications
Plastic biaxial geogrid is the ideal geotechnical material in situations where stresses are applied in two directions, it is the ideal geotechnical product used to reinforce the pavement base and improve the subgrade for any soil stabilization and reinforcement applications such as municipal roads, highways railway, access roads, parking lots industrial shipping yards, etc. provides high strength, high performance, longer life, ensured reliability and quick installation for base reinforcement of paved roads, construction haul roads, foundation reinforcement, permanent unpaved roads, working platforms on weak soils, parking areas, etc
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.