Soil Stabilization And Gravel Driveway Biaxial Geogrid Width 5.9m
Plastic Road Geo Grids PP Biaxial Geogrid 40/40Kn For Road Reinforcement
Biaxial Plastic Geogrid Introduction
The properties of Biaxial Geogrids, made in Polypropylene (PP) with their square apertures, high tensile strength and optimised geometry of nodes and ribs make them equal to any other similar material. The reinforcing action of PP Biaxial Geogrids lies mainly in confining soil and increasing its shearing resistance by a process of interlocking between the square ribs and the soil. The load dispersal effect from the interlocking mechanism is highly effective and can reduce sub-base thickness and construction cost. PP Biaxial Geogrids can be used with any kind of mechanical fill material. Two aperture size ranges are available for optimum matching with project fill. Standard Roll Dimensions
1. PP Biaxial Plastic Geogrid is made from PP resin as its raw material, produced through extruding, punching, heating, longitudinal stretching, transverse stretching.
2. Performance: High tensile strength at both longitudinal & transverse dire.
- Main type: 15-15, 20-20, 25-25, 30-30, 40-40, 50-50
Biaxial Plastic Geogrid Specification
| project | TGSG15-15 | TGSG20-20 | TGSG25-25 | TGSG30-30 | TGSG40-40 | TGSG45-45 | TGSG50-50 |
| Longitudinal tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Transverse tensile yield force KN/m | 15 | 20 | 25 | 30 | 40 | 45 | 50 |
| Tensile Strength @2% Strain KN/m | 5 | 7 | 9 | 10.5 | 14 | 16 | 17.5 |
| Tensile Strength @5% Strain KN/m | 7 | 14 | 17 | 21 | 28 | 32 | 35 |
| Roll width | 3.95 or 5.95 meters | ||||||
| Roll Length | 50 meters | ||||||
Specification data
1, High tensile strength at both longitudinal and transverse direction.
2, High tension resistance,high plane torsion resistance modulus,good creep resistance and stable chemical nature.
3, High mechanic damage resistance and durability and large friction factor with sandy stone.
4, It can improve bearing force of foundation and increase diffusion angle.
Plastic Geogrid Mesh Feature:
Provide stability of the foundation without the need for piles or other ground improvement measures
• Allow safe access to site and the forming of a working platform
• Avoid excavation and replacement of the soft soil
• Prevent loss of drainage fill into the weak foundation
• Provide even and controlled settlement
• Allow faster consolidation
• Accommodate vertical band (wick) drain installation if consolidation needs to be further accelerated
Remarks:
PP plastic geogrids are available in varying strengths and thicknesses to ensure appropriate material selection for your project.
Custom roll sizes are also available.
Workshop
Welcome to consult.
I am Leo, hope we can be your best supplier.
Whatsapp/Wechat: 008615030705799
Phone: 008615031817097
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.