IP66 Waterproof 6.6KW Wide Voltage Range Battery Charger for Electric Motorcycles and Hoverboards
Deligreen 3.3kW/6.6kW fully enclosed frequency conversion pulse charger is specifically designed for electric vehicle power batteries according to national standards. This product features high efficiency, compact size, exceptional stability, and long lifespan.
- IP66 waterproof rating ensures safe operation in any weather conditions
- Built-in thermal sensor for reliable operation from -20℃ to +85℃
- Automatic overheat protection with auto-recovery function
- Includes cables and plugs (specify required plug types when ordering)
- Available with or without CAN communication interface
- CAN protocol customization available, including TC CAN
Available with wide range input voltage (AC 90-265V) in addition to fixed 220V/110V input options.
| Input Voltage Range | Input Current | Output Rated Voltage | Max Charging Voltage | Max Charging Current | Power Factor | Efficiency |
|---|---|---|---|---|---|---|
| AC 90-265V | ≤ 16A | 48V | 58.8V | 45A | ≥0.99 Half load | ≥93% Full load |
| 72V | 99V | 40A | ||||
| 84V | 116V | 40A | ||||
| 96V | 132V | 32A | ||||
| 144V | 198V | 23A | ||||
| 312V | 440V | 10A |
| Protection Type | Specification |
|---|---|
| Input over-voltage protection | AC 264V |
| Input under-voltage protection | AC 90V |
| Output over-voltage protection | Yes |
| Output start voltage | 0.3 times rated voltage |
| Output over-current protection | Yes |
| Over temperature protection | Power down from 85℃, shut off at 90℃ |
| Short circuit protection | Stop output |
| Reverse battery protection | Stop output |
| Ground protection | ≤ 100mΩ |
| CAN Communication protection | Automatically stop output when CAN communication fails |
| Power failure protection | Yes |
| Withstand pressure | Input to output: 2000VAC ≤ 10mA, Input to ground: 2000VAC ≤ 12mA, Output to ground: 2000VAC ≤ 10mA (All 1 minute) |
| Insulation resistance | Input, output, signal end to shell ≥ 10MΩ (Test voltage 1000VDC) |
| Electromagnetic immunity | Satisfy GB/T 18487.3-2001 11.3.1 |
| Electromagnetic disturbance | Satisfy GB/T 18487.3-2001 11.3.2 |
| Harmonic current | Satisfy GB 17625.1-2003 6.7.1.1 |
| Current rise time | ≤ 5S, Overshoot ≤ 5% |
| Off response time | 100% to 10% ≤ 50mS, 100% to 0% ≤ 200mS |
| Protection level | IP66 |
| Vibration resistance | 10-25Hz Amplitude 1.2mm, 25-500Hz 30m/s², each direction 8 hours |
| Noise | ≤ 60dB (Class A) |
| MTBF | 150,000 hours |
| Working environment | Relative temperature 5% -95% without condensation |
| Operating temperature | -20℃ ~ +85℃ |
| Storage temperature | -30℃ ~ +90℃ |
Available as combination of two 3.3kW battery chargers for 6.6kW total capacity with air cooling and horizontal mounting.
- Flat outer surface without scratches or deformation
- Uniform surface coating
- Firmly installed nameplates with clear markings
- Secure fastening of components without defects
- Clear product identification including part number, model, and safety warnings
- Packaging includes product name, model, specifications, and manufacturer details
- Includes comprehensive product manual
- Suitable for transport by car, boat, and airplane
- Store in clean, dry, well-ventilated environment at 5℃-40℃
- 2-year shelf life from manufacturer date
- Professional testing recommended if stored beyond 2 years
An electric vehicle charger is a power conversion device specifically designed to charge vehicle batteries. These chargers are categorized as DC chargers and AC chargers based on their functionality and output characteristics.
Most battery manufacturers recommend sizing the charger at approximately 25% of the battery capacity. For example, a 100Ah 12V battery would require about a 25A 12V charger.
One-stop provider including lithium batteries, active balancers, BMS, chargers, and accessories
Russia, Poland, and USA warehouses ensure quick delivery worldwide
Factory direct pricing with lifetime technical support
Comprehensive warranty coverage and distributor opportunities available
LiFePO4 batteries and Lead acid batteries
US, UK, AU, and EU plug types
Yes, we support customized chargers and OEM services
- Over temperature protection
- Over current protection
- Over voltage protection
- Over power protection
- Short circuit protection
- Power saving fast charging
- Data logging and intelligent control
- Spark-free design
We welcome your inquiries and look forward to discussing your specific requirements. Contact us for more information and technical specifications.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.