Mechanical Seal Type 301 For Water Pump Replace Burgmann BT-AR
Single-Spring Mechanical Seal 301 Replace Aesseal B01 Burgmann Bt-Ar
Operations Conditions OF Water Pump Shaft Seal :
- Structure: Single End
- Pressure: Low Pressure Mechanical Seals
- Speed: General Speed Mechanical Seal
- Temperature: General Temperature Mechanical Seal
- Performance: Wear
- Standard: DIN24250
- Model NO.: Type 301, BT-AR
- Balance: Unbalanced
- Specification: Inner Diameter: 6 mm to 60 mm
- Temperature:-20ºC to +120ºC
- Pressure:≤0.6MPa
- Speed:≤10m/s
Materials Of Water Pump Shaft Seal:
- Structural Features: single end, unbalanced, independent direction of rotation, rubber bellow transmission. This component has a compact structure and it is easy to install. The bellow and the spring provide pressure compensation to the seal faces. The rubber bellow design prevents possible radial run-out so the floatabilitiy of the rotary ring is increased.
- Stationary Ring:Ceramic(Alumina),Silicon Carbide Reaction Bonded
- Rotary Ring:Q5,Resin Impregnated Carbon Graphite(Furan),Silicon Carbide Reaction Bonded
- Secondary Seal:Fluorocarbon Rubber(FKM),Nitrile(NBR),Ethylene Propylene(EPDM)
- Spring and Metal Parts:Stainless Steel
- Seat Types:
- Applications:Clean Water
Performance Capabilities:
|
Temperature
|
-30℃ to 200℃, dependent on the elastomer
|
|
Pressure
|
Up to 6 bar
|
|
Speed
|
Up to 10 m/s
|
|
End play/axial float allowance
|
±0.1mm
|
|
Size
|
6mm to 70mm
|
|
Brand
|
JR
|
|
Face
|
Carbon, SiC, TC
|
|
Seat
|
Ceramic, SiC, TC
|
|
Elastomer
|
NBR, EPDM, FKM etc.
|
|
Spring
|
SS304, SS316
|
|
Metal parts
|
SS304, SS316
|
|
Packing Detail
|
1.From 8mm to 30mm is packed in plastic sheets grouply and M box.
2.From 32mm to 70mm is wrapped in plastic paper individually then grouply in M box. 3.Individual packing ,1 pc in 1 small box is available as well with cost of packing added. |
- 301mechanical Seals Factory Direct Sale Pump Seal 301 SeriesMechanical Seals Water Seal
- Enclosed rubber bellows mechanical seal 301 (BT-AR)
- Equivalent to:
- Burgmann BT-AR mechanical seal
- John Crane (Cyclam) PR/DR mechanical seal
- Flowserve 118 mechanical seal
- Latty T750 mechanical seal
- Roten 37B/ L5 mechanical seal
- Sterling BT mechanical seal
- Comonly used as the external seal in water cooled APV pumps
We are engaged in manufacture and installation exporting and wholesaling quality range of Industrial Seal, Single Spring Seal, Balance and Unbalance Spring Seal, External Mounted Seal, PTFE Bellow External Mounted Seal, Catridge Balance Seal, Multiple Spring Balance Seal, Dry Running Reverse Balance Seal, Agitator Double Acting Unbalance Seal, Single Conical Helical Spring, Rubber Bellow Seal, Multi Spring Seal, Metal Bellow Seal, Elastomer Bellow Seal, Conical Spring Seal, Air Condition Compressor Seal, Auto Cooling Seal, Metallic Bellow Seal,
All ranges of mechanical seals for Flygt Pumps, Grundfos Pumps, Pumps, APV Pumps, Grindes Pumps, Fristam, ABS, Alleeiler, EMU, GEA
Tunchenhagen, Godwin, Hidrostal, Hilge, Johnson, Lowara, Waukesha, Vogelsang Pumps etc.
At the meantime, we could manufacture seals according to your sample or drawing, and design as your request,Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.
FAQ
Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.
Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.
Question 3: Where is your factory located? How can I visit there?
Answer: Our factory is located in Ningbo, China. You can fly to Ningbo or Shanghai airport directly. All our clients, from home or abroad, are warmly welcome to visit us!
Question 4: How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 authentication.
Question 5: How about the lead time?
Answer: Within10-20 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T at sight for large amount of the order.
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.
Question 8: If I can buy pumps or pump parts from your company?
Answer: Yes , we also provide pumps and pump parts, such as Lobe pumps, Compound & homogeneous pumps, Homogeneous & emulsification pumps and so on
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.