Heat Resistant Anti Oxidation 30N Nitrile Rubber O Rings
NBR 200℃ Rubber Seal Ring
Large ship Sealing O ring Heat resistant anti-oxidation preservative Precision seal O rings
-
Product performance description
NBR O-rings
Size: AS568, ISO3601
Hardness: DURO 50~90 A, general 70/90 A
Color: general Black
Service temperature: -30°C~+120°C
tightness, abrasion resistance and water resistance, strong cohesive force.
-
Product usage introduction
Advantage
• They seal over a wide range of pressure, temperature and tolerance.
• Ease of service, no smearing or retightening.
• No critical torque on tightening, therefore unlikely to cause structural damage.
• O-rings normally require very little room and are light in weight.
• In many cases an O-ring can be reused, an advantage over non-elastic fl at seals and crush-type gaskets.
• The duration of life in the correct application corresponds to the normal aging period of the O-ring material.
• O-ring failure is normally gradual and easily identifi ed.
• Where differing amounts of compression effect the seal function (as with fl at gaskets), an O-ring is not effected because metal to metal contact is generally allowed for.
• They are cost-effective.
Engineering Machinery Industry
Rod seal, piston seal, wipers, buffer seal and guide ring are widely used in earth-moving engineering machinery, such as excavator, hammer.
Petroleum Industry
Spring Energized PTFE or PEEK seals are used in petroleum industry, such as Large bore/high pressure frac gate valve and X-mas tree in oilfield.
Hydraulic & Pneumatic Industry
PTFE, PU, NBR Seal can be used in hydraulic & pneumatic, such as hydraulic cylinder and air cylinder
Intelligent Manufacturing & New Energy
Spring Energized PTFE or PEEK seals are used in intelligent manufacturing & New Energy, such as robot industry, uuv.
|
Product Name
|
O type ring seals
|
|
Material
|
NR, NBR, SBR, EPDM, IIR, CR, SILICONE,etc
|
|
Color
|
Black,white,Red, blue, green, yellow,all pantone colors and RAL colors
|
|
Business Scope
|
Rubber injection molding, Rubber transfer molding, Rubber compression molding, Rubber to metal molding, Custom rubber molding
|
|
Quality Control
|
ISO/TS16949:2002 and ISO14001:2004 system
|
1. Analysis items: principal component analysis, map analysis, failure analysis, full component analysis, material identification, formula reduction, etc.
2. Physical and mechanical properties: density/specific gravity, hardness test, surface resistivity, tensile properties, impact properties, etc.;
3. Aging performance: ozone, ultraviolet aging, salt spray aging, xenon lamp aging, carbon arc lamp aging, halogen lamp aging, life estimation, etc.;
4. Liquid resistance: lubricant resistance, gasoline resistance, engine oil resistance, acid resistance, alkali resistance, organic solvent resistance, water resistance, etc.;
5. Combustion performance: fireproof and flame retardant, vertical burning, alcohol burner burning, roadway propane burning, smoke density, burning rate, etc.;
6. Applicable performance: hydraulic pressure resistance, impulse test, electrical conductivity, water tightness, air tightness, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.