Waterproof OEM Conductive Silicone Rubber Keypad for Medical Device 30 Shore A Backlit
Waterproof OEM Conductive Silicone Rubber Keypad for Medical Device
Waterproof conductive silicone rubber keypad with 30 Shore A soft-touch keys and optional LED backlight, engineered for medical and instrument control panels.
Application Scenarios
- Medical monitors, infusion pumps and diagnostic devices
- Laboratory and analytical instrument panels
- Industrial control panels and rugged handhelds
- Automotive and marine control interfaces
- Telecom and intercom backlit keypads
Simple Parameter Table
| Parameter | Specification |
|---|---|
| Material | Medical Grade Silicone Rubber |
| Hardness | 30 Shore A |
| Key Type | Conductive Carbon Pill / Backlit |
| Backlight | LED / EL Available |
| Operating Temperature | -50 C to +200 C |
| Contact Resistance | Less than 80 Ohm |
| Actuation Force | 120-180 g |
| Travel | 0.6-1.0 mm |
| Ingress Protection | IP67 Waterproof |
| Lifespan | Over 2,000,000 cycles |
Quality Assurance
Every keypad batch is produced under an ISO 9001:2015 certified quality system and inspected against a documented control plan before shipment.
- 100% force-displacement travel test and contact resistance check on each cavity
- Raw silicone compound verified per batch: hardness, tensile strength and compression set
- Biocompatible silicone compound tested to ISO 10993 and validated for ethylene oxide sterilization
- Full dimensional report, RoHS/REACH and SGS test reports available on request
Packaging Specifications
Keypads are packed in anti-static bags, separated by foam trays and sealed in clean-room grade cartons with desiccant. ESD-safe labeling and traceable lot numbers are provided, and packaging can be qualified for your sterilization and clean-room workflow.
After-Sales Service
- 24-hour engineering response for technical and application questions
- 12-month warranty against manufacturing defects; free replacement of nonconforming parts
- Free 3D drawing and sample tooling review before mass production
- Long-term supply protection: molds stored for 10 years, repeat orders without tooling cost
Factory Scale
- 18,000 m² manufacturing base with 6 vacuum compression molding lines
- Monthly capacity over 2,000,000 pcs, 120+ skilled production staff
- In-house mold workshop, CNC engraving and LSR injection capability
- Clean-room molding area for medical silicone, in-house conductive carbon pill printing line
FAQ
Q: Are the keypads suitable for medical devices?
A: Yes. We mold with medical grade silicone and support ISO 13485 documentation, biocompatibility reports and clean-room packing.
Q: Can you add LED backlight?
A: Yes. We integrate LED or EL backlight with translucent keys and light-guide layers to your drawing.
Q: Do you offer conductive keypads?
A: Yes. Carbon pill and conductive ink options give low, stable contact resistance for reliable switching.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.