1. Functions

2. Parameters
 

When selecting industrial dehumidifier, it is necessary to choose the appropriate dehumidifier according to the required area of the dehumidifier

site, to avoid the use of large dehumidifier in small space, resulting in a waste of energy;Large space dehumidifier using small dehumidifier,

affect the dehumidification efficiency, but also consume more power

In the process of transportation and placement of industrial dehumidifier, there will inevitably be vibration, roll and other actions, resulting

in the displacement of refrigerant in the compressor.If the machine is turned on at this time, the compressor will not work normally, the noise

will be large, and the dehumidification efficiency will be relatively low.Therefore, it is necessary to stand the dehumidifier for a period of

time, so that the refrigerant in the compressor can be reflux in place before it is used.

After opening the dehumidifier, it should be kept in standby state as far as possible, and do not open and close frequently, so as to greatly

reduce the damage to the machine performance and not waste a lot of electricity.After power failure, it is necessary to turn off the power

immediately to prevent the sudden power call and the sudden impact of large current on the dehumidifier and damage the dehumidifier.

In terms of placement, it is recommended to place the dehumidifier in a place with air circulation and flat ground, and put it next to the

wall.In this way, the moist air is pumped into the dehumidifier as soon as possible, and the dry air can be quickly circulated to all corners of

the workshop to achieve better dehumidification effect.