Wall Mounted Dehumidifier For Garage 1150W 4kg/H

 

 

Parameters
 

Article No.	CFB4.0D
Article Name	Industrial Dehumidifier
Dehumidification capacity	4Kg/h
Applying Area(with three meters height)	100~120M²
Voltage	220V~50Hz
Rated Power	1150W
Air Circulation	1000M³/H
Refrigerant	R22
N.W.(KG)	55KGS

 

 

Product Description

 

 
 
 Industrial dehumidifier should be placed in a place with air circulation and flat ground, so that the wet air can be quickly pumped into the dehumidifier, and the dry air can be quickly circulated to all corners of the factory, so as to achieve better dehumidification effect.
On the other hand, the machine does not need to be close to the wall, because after a long period of operation, the machine temperature will continue to rise;The air inlet of the machine should be kept away from the goods. Goods are forbidden to be placed on the top of the machine to avoid blocking and affecting the circulation effect.

 Functions

After opening the dehumidifier, it should be kept in standby state as far as possible, and do not open and close frequently, so as to greatly

reduce the damage to the machine performance and not waste a lot of electricity.After power failure, it is necessary to turn off the power

immediately to prevent the sudden power call and the sudden impact of large current on the dehumidifier and damage the dehumidifier.

In terms of placement, it is recommended to place the dehumidifier in a place with air circulation and flat ground, and put it next to the

wall.In this way, the moist air is pumped into the dehumidifier as soon as possible, and the dry air can be quickly circulated to all corners of

the workshop to achieve better dehumidification effect.

Dehumidification machine for air duct (inlet and outlet) on a regular basis or filter to clean up, factories and warehouses of dust is more, for

a long time use dehumidifier the wind can't get into dehumidifier, will directly affect the dehumidifying effect, so need to regular cleaning of

the dehumidifier air duct filter, frequency can be decided according to the condition of site conditions and mesh.