200bar Ceramic Piezoresistive Pressure Sensor With PCB Moudle Anti Corrosion
Price:
negotiable
MOQ:
1000PCS
Delivery Time:
10~20days
Brand:
TAIMI
Product Description
200bar Anti-corrosion ceramic piezoresistive pressure sensor with PCB moudle
The sensors are designed in such a way so that temperature changes and overloading do not
cause any loss in reliability. The use of ceramic ensures high linearity across the entire range
of measurement and reduces effects of hysteresis to a minimum.
Additionally, PPS101 are thermal compensated by PTC resistors. The offset can be adjusted on
customer specification.
Application: Pressure and/or temperature switch + transmitter for usage in process automation.
• Pressure Measurement Type: Relative (Absolute as an option)
• Pressure Measurement Ranges:
• 0~1 bar,0~10 bar, 0~25 bar, 0~100 bar. 0~250 bar, 0~400 bar, 0~600 bar
• Vacuum: -1...0 bar, -1...+1 bar, -1…+10bar
• Pressure Measurement Performance(As per EN62828-2:2018):
• Hysteresis: Max. ±0.2% of FS
• Non-repeatability: Max. ±0.2% of FS BFSK
• Non-linearity: Max. ±0.2% FS
• Accuracy over 1 year operation(Incl. thermal drift): Max. ±0.25% FS/year
• Zero Output Thermal Error: Max. ± 0.2%FS
• Span Output Thermal Error: Max. ± 0.2%FS
• Pressure Media: Hydraulic(Coolant, Hydraulic Fluids, Oil, Water) / Pneumatics (Compressed Gas)
• Overpressure safety: min. 2.5x
• Burst pressure safety: min. 4x
• Vacuum safety: -1 bar
• Service Life: 100 million switching cycles
• Operating Temperature: -40...+125 oC (Including Process Connection)
• Storage Temperature: -40...+135 oC
Temperature Compensation: Yes(-10℃ to 70℃, Ideally: -20℃ to 85℃)
• Temperature Measurement Performance:
• Temperature error: ±0.5℃
• Temperature stability error: Max. ±0.3℃/year
• Max. overall diameter: <=18mm(with reference to process connection)
• Shock: 500g based on DIN EN 60068-2-27 (1ms).
• Vibration: 25g based on DIN EN 60068-2-6 (10~2000Hz).
• Supply Voltage: 2 to 35Vdc
• Output Electrical Signal: mV(or most cost effective option)
• Response Time (0 to 100%): <=1 ms
• Compliance Type: RoHS
VIII. Use considerations:
1. the core is installed, nylon washer should be installed on the lead surface of the core to make the core force uniform and avoid zero point instability. Before 2. the welding lead, please preheat the core body, increase the solderability of the solder joint, avoid the solder joint heating for a long time to reduce the adhesion of the pad. For welding, use no more than 60 W of tip soldering iron. 3. the black film part do not touch, scratch the black film will damage the internal circuit, damage the sensor
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
TaiMi(Shenzhen) electronics technology Co.,ltd
Location
A04 10 B Blocks of Shenzhen Bay Science and Technology Eco-Park SHENZHEN,Guandong,CHINA 518052
Contact Person
Cherry liu