Corrosion Resistant Thick Film Ceramic Piezoresistive Pressure Sensor

Piezoresistive Ceramic pressure sensorProduct Description

The sensors are piezoresistive pressure sensors based on ceramic. The measuring bridge is printed directly on one side of the ceramic diaphragm by means of thick film technology. The rear part of the diaphragm can be exposed directly to the medium to be measured because of the excellent chemical resistance, no additional protection is normally required. Thanks to the reinforced outer area (monolithic structure)the sensor can be mounted directly in a case by using an O ring or else it can be mounted to a metal fitting

Piezoresistive Ceramic pressure sensor Overview

The sensor of the series are piezoresistive pressure sensors based on ceramic. The measuring bridge is printed directly on one side of the ceramic diaphragm by means of thick film technology. The rear part of the diaphragm can be exposed directly to the medium to be measured. Because of the excellent chemical resistance no additional protection is normally required.

Thanks to the reinforced outer area (monolithic structure) the sensor can be mounted directly in a case by using an O-ring or else it can be mounted to a metal fitting.

The sensors are designed in such a way so that temperature changes and overloading do not
cause any loss in reliability. The use of ceramic ensures high linearity across the entire range
of measurement and reduces effects of hysteresis to a minimum.
Additionally, PPS101 are thermal compensated by PTC resistors. The offset can be adjusted on
customer specification.

Piezoresistive Ceramic pressure sensor Specification:

Piezoresistive Ceramic pressure sensorModel Selection

Piezoresistive Ceramic pressure sensorApplication

Piezoresistive Ceramic pressure sensorApplication:

Piezoresistive Ceramic pressure sensorWorkshop: