3.7v 250mah Lipo 302535 Curved Lithium Polymer Battery
3.7v 250mah 302535 curves shape rechargeable Lithium Polymer Battery
lipo battery 3.7v 250mah Specification:
| Specification | 250mAh polymer li-ion battery |
| Model | HHS 302535 |
| Weight | 6g |
| Size | Thickness × Width × Length (mm) |
| 3.0±0.5×25.0±0.5×35±0.5 | |
| Nominal voltage | 3.7V |
| Nominal capacity | 250mAh |
| Max charge current | 1C |
| Charging method | charge with constant current 1C to 4.2V, then charge with constant voltage 4.2V till charge current is less than 0.01C |
| Max discharge current | 1C |
| Discharge cut-off voltage | 3.0 V, the over-discharge detection voltage of PCM |
| Operating environment | Charging, 0°C ~ 45°C ; 65±20%RH |
| Discharging, -20°C~60°C ; 65±20%RH | |
| Storage environment | -20°C~45° |
| 65±20%RH | |
| storage for a long time(>3 months) and the storage condition shall be:<35°C;65±20%RH;3.7~3.9V | |
| CycleLife(80%Prime Capacity) | >500times |
| warranty | Period of warranty: 12 months after sales |
| Right | |
| Range of warranty: There is low voltage, expansion or leakage with the correct use of the | |
| cell in the period of warranty. | |
| Identification | Warnings would better be marked on the surface of the battery which is tied up by certain |
| cells | |
| *Using the charger designated by the manufacture | |
| *Don't throw the battery in fire or heat it. | |
| *Don't short-circuit. | |
| *Don't unpack the battery or change its structure. | |
| Pack design | * Battery pack should have sufficient strength and battery should be protected from mechanical shock |
| * No cell movement in the battery pack should be allowed. | |
| * No Sharp edge components should be inside the pack containing the battery. | |
| Charging | Charging current and charging voltage should be less than specified in the Product Specification. |
| The charger shall be designed to comply with Product Specification. | |
| It is dangerous that charging with higher curren or voltage than Product Specification may cause damage to the cell electrical,mechanical safety performance. |
lipo battery 3.7v 250mah features:
1, Longer storage life than NiMH Batteries
2, Light weight and higher energy density than any rechargeable battery
3, Installed IC chip will prevent the battery pack from over charge and over discharge.
It helps protect battery chemistry integrity and prolongs battery life.
4, Installed polyswitch will cut off power if battery discharge current more than 6.6Ah
5, Perfect for building up battery pack for medical equipment Back-up or EPS Emergency Power
6, Supply which requires compact size and lighter weight
Application of lipo battery 3.7v 250mah:
1. GPS, MP3, MP4, PDA, PMC, PMP, PSP, portable pc, laptop, tablet pc;
2. Lights, model aircraft, miner's lamp, safety helmets, safety headlights;
3. Bluetooth headsets, e-books, mobile DVD, mobile TV, mobile scales,
positioning devices, interphone, storing power, family power storing station;
About us:
1.Professional lithium-ion battery pack for over 10 years,have own factory.
2.product certificates.
3.Many different li-po battery models in our company
| NO. | Type | Model | Capacity | Voltage | Size | Weight | ||
| (mAh) | (V) | T(max) | W(max) | L(max) | Typical | |||
| 2 | HHS-362040 | 362040P | 250 | 3.7V | 3.6mm | 20mm | 42mm | 4.3g |
| 3 | HHS-502030 | 502030P | 250 | 3.7V | 5.0mm | 20mm | 37mm | 4.3g |
| 4 | HHS-501835 | 501835P | 280 | 3.7V | 5.0mm | 18mm | 37mm | 5.6g |
| 5 | HHS-701535 | 701535P | 300 | 3.7V | 7.0mm | 15mm | 37mm | 5.6g |
| 6 | HHS-602030 | 602030P | 300 | 3.7V | 6.0mm | 20mm | 32mm | 5.6g |
| 7 | HHS-552035 | 552035P | 350 | 3.7V | 5.5mm | 20mm | 37mm | 7.8g |
| 8 | HHS-503030 | 503030P | 430 | 3.7V | 5.0mm | 30mm | 32mm | 8.7g |
| 9 | HHS-602046 | 602046P | 500 | 3.7V | 6.0mm | 20mm | 48mm | 8.9g |
| 10 | HHS-502560 | 502560P | 800 | 3.7V | 5.0mm | 25mm | 62mm | 15.7g |
Welcome your e-mail,call,or inquiry any time.Have a nice day!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.