□ Housing: high-pressure die-cast aluminum,first given a zinc chromate substrate, then finished in RAL7036 light grey polyester powder coating for optimum protection against harsh environments.

□ Front Glass: Toughened glass, secured within an aluminum frame.

□ Bracket: Galvanized steel, with additional locking screws.

□ LENs: Plastic.

LED Chip

SMD3030 or SMD5050, high luminous efficiency: up to 200lm

Lifespan>50,000 hours

Heat sink

Aluminum material is with the fin-type design for better heat dissipation

PC lens optional

Symmetrical PC lens:13 ˚ /30 ˚ /60 ˚ /90 ˚ /120˚

Rotatable bracket

Optional Rotatable bracket can be adjusted horizontal plane angle when you mounted a lamp.

Power Supply

Meanwell, Moso, Sosen driver are optional, with 5 years warranty

Professional outdoor AKESU powder

Corrosion and rusting resistance

SPD 10KV optional

IP66 waterproof

Safe and long life-span

European standard

Our lamp wire adopts the European standard. Brown representative Live Wire, green representative Naught wire and yellow-green representative earth

Waterproof connectors

The power connectors on all our lamps are IP67 waterproof.

INSTALLATION:
1.Fixed the lamp bracket to the mounting position, as shown in figure
2.Connect the input wire to the wire connector, as shown in figure2;
3.Adjust the lamp Angle to the right position:
a. Screw off the butterfly nut, remove the bolt, then the u-bracket will rotate easily.
b. Adjust the light projection direction to the suitable position.
c. Pass the bolts through the u-bracket hole and dial hole at the same time and tighten the butterfly nut so that the u-bracket does not loosen, as shown in figure

If there need to adjust the projection direction of a single module, please follow these steps:
a. Remove (1) screw with a cross screwdriver;
b. Loosen the (2) screw with a hex wrench;
c. Rotate the module to the right position, Module Angle adjustment range: -30°~30°;
d. Tighten the (1) screw and (2) screw, as shown in figure 4.
4. After checking, power on.

Applications:

Applied to the workshop, industrial building, sports center, gas station, parking lots, waiting room, train station, harbor, wharf, and other large energy-saving lighting.

QC

GYLED has a very strict Quality Control System, from checking and evaluation of incoming materials to the delivery of products, each item will be checked and tested several times.

MOQ: 1 CARTON

Maintenance:

1, Cut off the power.

2, Remove male and female connectors or power supply wires that need to be replaced, remove the screws.

3, Replacing with new components.

4, Re-tighten Replacement, connect the male and female connectors and wires of power supply.

5, Lock up the screws.

6, Repairs completed.

Advantage of FLOODLIGHT:

SAVE ENERGY

Replace your incandescent or flu

Certificates

After several years of endeavor and development, concentrating on the innovative spirit, GYLED established a professional management team. The company is guided and operated according to requirements from management systems of ISO9000, ISO14001 and OHSAS18001, and with introducing ERP IMS (Information Management System), management decision becomes more scientific and efficient. We will also continuously optimize the management system, provide an excellent platform and ensure our every employee creates value for users.

ABOUT US

We, Shanxi Guangyu LED Lighting Co., Ltd, established in 1988, is a professional LED lighting products manufacturer in Shanxi province of China. Our Sales office and R&D center both are in Shanghai. GYLED is your provider of premier quality LED lighting products and solutions. Our main products are LED Industrial Highbay lights, LED Flood Area lights, LED Streetlights. With our long-term great efforts, our products comply with CE, RoHS, ERP, GS, SAA, UL, cUL and CCC certificates. We aim at focusing on the best products with high quality and low cost.

Professional Packaging

• Foam Protection to Withstand Harsh Transportation and Impact

• Carton and Pallet with Foam and Cling Wrap to Withstand Impact, High Humidity in Containers, and Rainy Weather

• To Guarantee an Intact Condition when Receiving the Goods

Shipment

1. DHL(a big discount)
2. TNT/FedEx/UPS
3. DHL Airway express. About 3-5days you can get them by the door of your home or office.
4. Seaway.15-25 days. It will definitely save your shipping cost for the large order.