50um 80um PE Sintered Porous Filter Disc For Diffuser

Also known as Lvyuan sintered filters and frits, these filters have tiny holes that trap very small particles. Discs are often used in laboratories and gas-bubbling applications (sparging).

They’re made of Bronze / PE or 316L stainless steel for excellent corrosion and abrasion resistance.

Select Filtering Degree Based on the size of the particles you wish to remove. For example, the particle size of sand is about 80 microns. 

– Flow control. The isotropic and homogeneous porosity allows that a fluid that circulates through it have a constant flow at the exit of the porous part. Typical applications are heat exchangers, medical gases, scuba diving, industrial gases, etc.

– Aeration. The air circulation through porosity results in a constant and controlled air flow at the exit of the porous component. The use sectors are: liquids repassing in food industry (liqueurs, wines, and gas beverages), ionization, gas burners, aquaria, clinical analysis, etc.

– Fluidization. The air circulation through the porous component has as result that the exit flow is distributed with the same pressure in all points, allowing then the controlled handling of powdered products. This property is used for: transporting cement, flour, alumina, ashes, toner powder, etc.

– Anti-moisture. Porosity is able to retain and condense the moisture contained in a gas that circles through it. Typical applications are: drying in general, electronic equipment’s protection, etc.