Fin 215 Pleated Filter Cartridge
OEM size 10 20 30 40 inch 5 micron water pleated filter cartridge with stainless steel core
Microporous pleated filter element, the main filter material is : Stainless steel wire mesh, sintered wire mesh, Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether sulfone, Nylon, etc. Most of the raw materials are imported from abroad.Pleated filter element is a kind of
deep filtration filter, it is usuaslly used as liquid overheating,clarification, filtration and terminal filter.
Features and Benefits
Low differential pressures, high dirt-retention capacity and a long service life.
Pleated depth filtration with maximum filtration area.
high flow rate.
Great chemical compatibility and acid-base resistance for liquid filtration.
A wide range of fine filters which is suitable for different industries.
| Outside Diameter: | 2.7''(69mm) |
| Length: | 9.75'',10'',20'',30'',40'' |
| Filter media: | PP |
| Support Layer/Cage/Core/ End caps : | Polypropylene (PP) |
| Seal Material : | Silicone,EPDM,NBR,Vilton,Teflon,E-FKM |
| Removal Rating: | 0.1um, 0.22um, 0.45um, 1um, 3um, 10um, 20um, 50um |
| Maximum Operating Temperature | 80°C at 1bar, support adaptors are recommended for temperature exceeds 50℃ |
| Maximum Differential Pressure : | 4.0Bar, normal temperature |
| Maximum Differential Pressure(Reverse Direction): | 2.0Bar normal temperature |
| Maximum temperature sterilization : | 5times, 20 minutes cycles at 120℃ |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.