0.3 Micron FFU Fan Filter Unit
0.3 Micron FFU Fan Filter Unit
Clean Room Ceiling Hepa Filter Fan Unit 99.99% High Efficiency 0.3 Micro
FFU fan filter unit is mainly used for purify the air into the clean area to make sure it can reach requirement cleanliness class,
Uniform air wind blow out at a speed of 0.45m/s with adjustable speed ±20%..
FFU Fan Filter Unit which draws in contaminated air from the top of the module, and exhausts filtered clean air vertically in a unidirectional (laminar) air stream at its base, is a self-contained fan and filter module for cleanroom applications.
Material Data
Casing material: Galvalume sheet, stainless steel or aviation aluminum.
Fan: Domestic motor or imported motor.
Filter material: Ultra-fine fiberglass or PTFE.
Filter efficiency: H13~U17.
Sealing gasket: Sealing gasket in double air supply sides.
Temperature: Maximum 90°C in continuous service.
- Suitable for Class 1-1000 clean room
- Simple and light design,low height ,which can save space and is easily for installation and daily maintenance.
- Unique inlet air channel ,Low vibration and noise
- Uniform and steady air flow
- High efficiency motor ,3 gear control ,low current consumption and electricity saving
| Model Parameters |
FFU-1175S | FFU-57S | FFU-87S | FFU-1175S2 | FFU-725S |
| FFU-1175Z | FFU-57Z | FFU-87Z | FFU-1175Z2 | FFU-725Z | |
| Nominal Volume (m3/h) | 1080 | 530 | 1650 | 2200 | 1700 |
| Noise Db(A) | 48-54 dbA | 48-54dbA | 50-56dbA | 52-58dbA | 50-56dbA |
| Hepa filter efficiency | ≥99.99% ~ 99.9995%( @≥0.3μm) | ||||
| Power | AC220V/110V±10%,single phase ,50Hz~60HZ | ||||
| The Out Power (W) | 150 | 150 | 190 | 255 | 190 |
| Casing size L*W*H(mm) | 1175*575*277 | 575*575*262 | 875*1175*350 | 1175*1175*350 | 725*1475*345 |
| Hepa Filter (mm) | 1170*575*70 | 575*575*70 | 875*1175*70 | 1170*1170*70 | 720*1470*70 |
| Pre Filters (mm) | as required | ||||
| power | AC 110 or 220 50 Hz or 60 Hz single phase | ||||
| speed control | three speed control (manual or computer group control) | ||||
| operative mode | the power indicator switch operation and failure indicator | ||||
| overload protection | Double overload protection with motor and controller switch | ||||
| power access | socket or terminal block | ||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.