Clean Room Porcelain White PP Board Laminar Fume Hood LED Display

PP Air Fume Hood

Porcelain white PP board, beautiful and generous; it has the characteristics of strong acid, strong alkali and corrosion resistance; reduces environmental pollution and maintains the health of users.

1. Specifications and overall material

Specification: 1500*850*2350 and 1800*850*2350

Upper cabinet body: It is made of 10mm acid and alkali resistant PP material, welded by the same color and homogeneous welding rod. Excellent acid and alkali resistance.

Movable countertop cover: 6mm acid and alkali resistant PP material with small holes; high strength, acid and alkali resistance, impact resistance, easy to clean.

Lower cabinet: 10mm acid and alkali resistant PP material, four-corner design "square tube structure" and "T" type structure, can obtain good load-bearing capacity. The lower cabinet requires an exhaust design, and the duct is directly connected to the main fume hood.

2. Sliding door system

Guide rail: special PVC material, line contact design, minimize friction

Window handle: Made of special PVC material, ergonomically designed, beautiful appearance and easy to use.

Window: Stepless design, light-feeling, 6mm plexiglass, with good strength and safety.

Pull rope: SUS304 outsourcing PVC pulley: PP silent pulley, low friction

3. Electronic devices:

Illumination: Waterproof, dustproof and impact-resistant three-proof lampshade, lamp tube, four-way electronic rectifier; adopts hidden, explosion-proof, moisture-proof fluorescent lamp holder, built-in 2 30W design fluorescent lamps, lamp holder is made of SUS stainless steel, and equipped There are explosion-proof glass above 5mm. The illuminance of the countertop should reach 400LUX. Lamps and ballasts must not be in contact with the airflow in the fume hood, and the design is detachable and easy to replace.

Socket: Laboratory special PP anti-corrosion and splash-proof cover + Hongyan three-hole socket (national CCC certification)

Controller: Integrated controller panel with LCD display function

4. Other accessories:

Door handle: acid and alkali resistant PP material

Hinge: All PP material, DTC110° hinge, external epoxy resin anticorrosive spray treatment, acid and alkali resistance, corrosion resistance, load-bearing, durable, no sound when opening the door, 15° self-closing, good rebound.

Door hinge: acid and alkali resistant PP material

Air collecting hood: acid and alkali resistant PP material, standard 250MM air outlet

Baffle: Acid and alkali resistant PP material; in the gap between the baffles, the baffle can be pushed up and down to meet the requirements when the baffle is seamless.

5. PP special sinks, 3 parallel, 150mm deep (one of the sinks is directly connected to the municipal drainage network; professional collection tanks are placed under the other two drains); 3 original liquid collection ports (bell mouth) are opened on the table (attached) Cover), just 15mm higher than the table. It is used to collect acid stock solution, alkali stock solution, and HF stock solution respectively, and the sewage is connected to a special stock solution collection tank.

Remarks: Some laboratories have reserved special waste liquid discharge pipes, which are under the sink of the fume hood in these laboratories.