Swing Gate Digital Optical Barrier Turnstiles Controlled Acrylic
Pedestrian Swing Gate Barrier System Digital Optical Barrier Turnstile Controlled Acrylic / Tempered Glass
FEATURES AND BENEFITS
• Use IC cards, ID cards, Bar code or magnetic cards as automatic identification system and achieve access, attendance fees or function
• A direction indicator, showed that pedestrian access to the current status of, and guide pedestrians correct and smooth passage
• Display has been in use for statistics and numbers
• With voice and strobe light alerts
• A combination of infrared sensors and police ant illegal entry into pedestrian access, the protection of pedestrians smooth and the prevention of the channel following
• Double anti-clipping function, photocell antic lipping and mechanical anti-clipping
• Auto re-set function, if no passing during identified card-reading time, the system will reset automatically the passengers are prohibited to pass until their second identified reading
• The barrier can be set to delay closing in 1-60s after a valid card-reading
OPERATING MODES
• Single passage in the set direction
• Bi-directional single passage
• Free passage in the set direction
• Always free or locked
Adaptive Place
1. Office: Business Building, Government Office, Etc.;
2. Business Services: Supermarkets, Shopping Malls, Hotels, Clubs, Banks, Etc.;
3. Leisure And Entertainment Venues: Parks, Scenic Spots, Amusement Parks, Etc.
4. Transport Site: Bus Station, Railway Station, Subway Station, Airport And So On.
5. Science And Education Unit: Colleges And Universities, Research Institutes, Libraries, Etc.;
SPECIFICATIONS:
|
Framework |
304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional) |
|
Thickness of ply |
1.5mm |
|
Finish |
brushed surface, polishing surface |
|
Shell's size (L*W*H) |
1400*150*990mm |
|
Swing arm material |
Tempered glass or Acrylic (optional) |
|
Stretching out swing length |
260mm~600mm |
|
The inductive card reader dimension |
equipped with the standard mounting brackets or tailor. |
|
Machine center |
Germany technological motor |
|
Power voltage |
AC220V±10%, 50Hz±10% |
|
Driver motor |
DC36 servo motor |
|
Main-board voltage |
12V DC |
|
In-built Infrared |
4 pairs/passageway |
|
Passing speed in normally open mode |
50 persons/min |
|
Passing speed in normally closed mode |
40 persons/min |
|
Passage Width |
600mm |
|
Swing arm transmission angle |
180° |
|
Swinging direction |
unidirectional or bi-directional |
|
Opening / closing time |
1 seconds |
|
The time required to running state after power on |
3 seconds |
|
Automatic reset time after the failure |
1 seconds |
|
Mean time to failure |
min. 10 000 000 |
|
Operation temperature |
-10℃ ~ +70℃ |
|
Relative humidity |
less than 95% not condensed |
|
Working Environment |
Indoor/Outdoor (with rain-tent cover) |
|
Input port |
relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal |
|
Communications port |
RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet |
Unique Advantages of Outdoor Turnstile Gate
Protection level is IP65: outdoor turnstile gate is with the functions of strong water-proof and dust-proof.
Shared use of pedestrian & cyclist: pedestrian, bicycle and motorcycle are allowed to pass through the same passageway.
Sustain violent hitting on gates: the elastic swing gates created can sustain frequent violent hitting. Within limited range of impact force, swing gates can withstand 200KGF external hitting.
Resistant to sunlight interference: the infrared sensor structure is adopting matrix distribution and anti direct sunlight design, which can reduce the interference from sunlight to avoid false alarming.
Resistant to high & low temperature: outdoor turnstile gate can work normally when under ultra-high or ultra-low temperature.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.