Finger Print Ic Id Card Reader Swing Gate Turnstile Time Attendance Entrance
China Factory Finger Print Time Attendance Entrance Access Control System Ic/Id Card Reader Swing Arm Turnstile
Introduction:
This Speedlane Optical Swing Turnstile ---can be compatible with IC card , ID card ,barcode card , fingerprint reading card recognition device used for staff, provide civilized , orderly access methods; effectively manage the access of staff . Can be widely used in the station, wharf subway , factories, office building , hotel , clubs, intelligent community , enterprises and institution that need intelligent access management.
Functions:
1) Optical turnstile is designed to control pedestrians entering or exiting restricted areas, usually used of high pedestrian traffic flow in both directions.
2) The body is made from brushed stainless steel which creates a seamless and elegant access point to blend into most indoor environment.
3) It can be integrated with any kind of access controller system (e.g.: RFID device, Push button, Fingerprint and Biometric device).
4) In case of emergency, the Optical Turnstile arm will open automatically to allow free passage.
5) Optical Turnstiles are suited for elegant and luxury entrance solutions.
6) The whole system runs smoothly. Long-life performance, high operation dependability and fast response.
7) Alarm function, in case of illegal intrusion and reverse intrusion.
8) Infrared sensor to prevent pedestrians from getting clamped.
9) Anti-breakthrough function: The gate is locked automatically until opening signal received.
10) Anti-trailing function: the turnstile will lock if there is forced entry without swiping the RFID card.
11) LED indicator.
12) When power is off, optical turnstile will open automatically, which complies with fire safety requirements.
SPECIFICATIONS:
| Framework | 304# Stainless Steel (default), 201# or 316# Stainless Steel or paint (optional) |
| Thickness of ply | 1.5mm |
| Finish | brushed surface, polishing surface |
| Shell's size (L*W*H) | 1400*120*1020mm |
| Swing arm material | Tempered glass or Acrylic (optional) |
| Stretching out swing length | 260mm~600mm |
| The inductive card reader dimension | equipped with the standard mounting brackets or tailor. |
| Machine center | Germany technological motor |
| Power voltage | AC220V±10%, 50Hz±10% |
| Driver motor | DC36 servo motor |
| Main-board voltage | 12V DC |
| In-built Infrared | 6 pairs/passageway |
| Passing speed in normally open mode | 50 persons/min |
| Passing speed in normally closed mode | 40 persons/min |
| Passage Width | 600mm |
| Swing arm transmission angle | 180° |
| Swinging direction | unidirectional or bi-directional |
| Opening / closing time | 1 seconds |
| The time required to running state after power on | 3 seconds |
| Automatic reset time after the failure | 1 seconds |
| Mean time to failure | min. 10 000 000 |
| Operation temperature | -10℃ ~ +70℃ |
| Relative humidity | less than 95% not condensed |
| Working Environment | Indoor/Outdoor (with rain-tent cover) |
| Input port | relay dry contact signal; +12V level signal, pulse width >100ms, DC12V pulse signal |
| Communications port |
RS232/ RS485 electric standard, communications range ≤1200m. Available to connect with external CAN BUS and Ethernet |
Standard functions & features of Swing Turnstiles Gate
| 1. | Infrared sensor to prevent pinch pedestrians. |
| 2. | Alarm function, in case of illegal intrusion and reverse intrusion. |
| 3. | Anti-breakthrough function. The gate is locked automatically until opening signal received. |
| 4. | Anti-trailing function, the turnstile will lock if someone wants to burst in without swiping the RFID card. |
| 5. | The whole system runs smoothly, long-life performance, high operation dependability and fast response. |
| 6. | Automatic reset function. If the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically. |
Service:
1. Any inquiries will be replied within 24 hours
2. Professional maufacturer. Welcome to visit our factory.
3. OEM/ODM available
You can have your own fashionable design at reasonable& competitive price
5. High quality:
1.) All products are stictly checked in warehouse before packing
2.) All products are well-packed before shipping
3.) All products have 2 years warranty
6.Payment:
T/T, Western Union, Paypal, Moneygram can be accepted
7. short lead time:
Sample order in stock, and 3--7 days for bulk production
8. Shipping:
Cooperate well with DHL, EMS, UPS, FEDEX, China Air Post
You can also choose your own shipping forwarder
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.