Hydraulic Cutting Z Type c Forming Machine 15m/min
Large Span C Type And Z Type Purlin Interchangeable Forming Machine
Introduction to "Large span C type and Z type purlin interchangeable forming machine":
When changing the specifications, the "Large span C type and Z type purlin interchangeable forming machine" can be used without changing the forming roll.
"Large span C type and Z type purlin interchangeable forming machine" can produce any model between C80-300 and Z120-300, and the thickness of the board can be 1.5-3.0mm.
The structure of "Large span C type and Z type purlin interchangeable forming machine": the frame adopts the gantry type and is integrally formed. The two sets of punching machines are punching machines, the power source is the cylinder downward pressure type: the hole position is fixed longitudinally, the level is adjustable, and the hole can be punched longitudinally.
"Large span C type and Z type purlin interchangeable forming machine" is easy to operate, which reduces the difficulty of operation for employees, saves time for mold change, and improves production efficiency.
Technical parameters of Large Span C Type And Z Type Purlin Interchangeable Forming Machine
| 1. Profile | 1. effective width: 80-300mm; |
| 2. material thickness: 1.5-3.0mm; | |
| 3. Profiles as attached below; | |
| 2. Process flow | Decoiling--feeding---levelling--forming---measuring-- |
| punching---cutting---production | |
| 3. Decoiler | Automatic hydraulic decoiler |
| 1. coil inner diameter: 450-700mm | |
| 2. max coil width: 600mm | |
| 3. carrying capacity: 1500kg | |
| 4. hydraulic power: 1.5kw | |
| 5. oil pump inner diameter: 120mm | |
| 6. pressure: 10Mpa | |
| 7. Photo as attached below | |
| 4.Forming device | 1. Shaft material: 45# steel, outer diameter 80mm; |
| Roller material: 15GCR bearing steel treated HRC 58-60° | |
| 2. Rollers: 5steps levelling rollers, 12steps forming rollers,2 steps feeding | |
| rollers, 4steps side roller | |
| 3. Transport: by chain | |
| 4. Forming speed: 5-10m/min | |
| 5. Motor: 15kw | |
| 6. Dimension & weight 10.5x1.7x1.4m | |
| 7. Weight: 4.5tons | |
| 8. Photo as attached below | |
| 5. Cutting device | 1. Material: blade, puncher and mold material: |
| Cr12 steel with quenched treated 60-62 | |
| 2. Cutting system: automatic hydraulic cutting, stop and then cut; | |
| 3. Photo as attached below | |
| 6.Controlling device | 1. screen: 5.7inch Taida touching screen from Taiwan |
| 2. PLC: Taida DVP14ES from Taiwan | |
| 3. coder: ENC-1-1-1T-24 from South Korea | |
| 4. Photos as attached below | |
| 7. Hydraulic | 1. Advanced hydraulic system from Taiwan |
| 2. Power: 15kw | |
| 8. Spare parts | 1. easy damaged parts: conk 2 pcs, fuse-link 4 pcs; |
| 2. rubber mat 1 pcs; | |
| 3. bolt spanner 1 pcs; | |
| 9.Payment and terms | 1. Payment: 30% T/T deposit in advance and balance after buyer's inspection |
| confirmation before shipment; | |
| 2. Delivery: within 45 days after receipt of deposit |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.