6.2x1.1x1.5 Trapezoidal Sheet Roll Forming Machine 50Hz 3Ph
Trapezoidal Roof Sheet Cold Roll Forming Making Machine
The "Trapezoidal Roof Sheet cold Roll Forming making Machine" adopts automatic computer control and automatic production. This is a low-cost, high-efficiency production machine.
The "Trapezoidal Roof Sheet cold Roll Forming making Machine" does not require too much manual intervention. It only requires workers to enter the required drawing data in the computer controller, start it with one button, and the machine will automatically produce.
The "Trapezoidal Roof Sheet cold Roll Forming making Machine" can process panels with a thickness of 0.2-1.0mm, while the traditional color steel roof panel forming machine can only process panels with a thickness of 0.2-0.7mm.
The advantage of the "Trapezoidal Roof Sheet cold Roll Forming making Machine" is not only that the thickness of the processed panel is large, but also the width of the processed panel is relatively different. If the raw material is 1000mm wide, the width of the finished product is 900mm, for example, 1200mm wide. The raw material, the width of the finished product is 1080mm.
"Trapezoidal Roof Sheet cold Roll Forming making Machine" is a machine used for wall tiles in the steel structure industry!
Main parameters of Trapezoidal Roof Sheet Cold Roll Forming Making Machine
| No. | Glazed roofing Tile Roll Forming Machine,can design as customer's request | |
| 1 | Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
| 2 | Thickness of coil sheet | 0.3-0.8mm |
| 3 | Coil width | 1000mm/ 1200mm/1250 |
| 4 | Effective width | 828/950 ( one machine can make one design) |
| 5 | Material of main frame | 350H steel structure, strong and durable |
| 6 | Diameter of Soild shaft | 80mm, high grade 45# steel |
| 7 | Roller | High grade 45# steel, quenched and tempered treatment, |
| hard chrome plated 0.05mm | ||
| 8 | Thickness of middle plate | steel side plate |
| 9 | Forming station | 13-18 rows as design |
| 10 | Drive type | By chain(1.0 inch), link bearing model 6210 |
| 11 | Power of main motor | 5.5 kw, Lichao, Shanghai, with reducer |
| 12 | Sidewall connection bar | 20mm, zinc plated |
| 13 | Forming speed | About 3-5m/min |
| 14 | Hydraulic pump station | 4 kw, 40# hydraulic oil |
| 16 | Material of razor blades | Cr 12 mov, quenching 58-62℃ |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.