Precision High Door Frame Production 0.3mm Roll Forming Equipment
Factory direct sales high-precision door frame production line
Why do we recommend customers to buy a door frame production line?
1. The door frame production line needs to be customized. Our technical team needs to design and manufacture the entire door frame production line according to your size. Due to the different molding processes of different factories or the different design concepts of the engineers, there is no guarantee that the equipment you buy can match ours. The door frame equipment is matched, which causes a large error.
2. The door frame production line equipment manufactured by our company is equipped with a unified controller. The control system of the entire production line can be connected in series and controlled by a control system, so as to ensure the stability of the entire door frame molding process. If the equipment controllers are not unified, we will not be able to control through a control system, which will require more unnecessary labor costs.
3. The door frame production line needs to be debugged by the staff after the installation is completed, so as to ensure the accurate size of the door frame products. Then the debuggers will only debug their own equipment and cannot debug other equipment. If the equipment you buy is not uniform, you need more Only when a commissioning person conducts consultations and conducts commissioning at the same time can the normal operation of the equipment be ensured.
4. Therefore, in order to ensure the convenience of the customer's door frame production line, our company recommends purchasing the entire production line to ensure high-efficiency production and bring you benefits as soon as possible.
| Components Details | |
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate | 16mm. We use thicker plates to ensure stability |
| of our products. | |
| Forming Steps | 15, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
| Treating process: tempering- finish turning, | |
| high rigidity, hard to deform. | |
| Cutting | Cr12, hardness HRC60-62. |
| Blade Material | Treating process: heat treatment- plane abrasion- wire electrode cutting. |
| Electric Components | |
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate. |
| PLC | Delta DVP 14ES |
| well-adapted to various conditions, such as moisture, | |
| electromagnetic disturbance. | |
| Frequency Converter | Delta VFD-M. It has the advantage of slowing down before cutting, |
| to ensure the length accuracy (±1mm, | |
| far better than industrial standard ±3mm). | |
| Length | Omron, made in Japan. |
| Measurement Device | It features with high accuracy and stability. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.