3x3 hdmi video wall processor with 4 Input 9 Output

Introduction

The 3x3 hdmi video wall processor with 4 Input 9 Output is a high-performance HDMI 2.0 video signal processor.

It can be used as a video wall splicing processor or as a seamless switching matrix switcher with4 inputs and 16 outputs.

All standalone output display or video wall display can work in multiview mode with a maximum of 4 windows.

1. Panel Layout

2.1 Front view

• LCM display screen: displays the routing status of each channel in the matrix. Used together with front buttons, it can set and view some parameters
• OUT SELECT:1, 2...9, 0, ALL
• IN SELECT: 1, 2, 3, 4

Press OUTPUT m +INPUT n +ENTER, switch input n to output m

• ALL button: Press ALL + INPUT n +ENTER, switch input n to all output ports
• Lock button : Hold this button more than 3 seconds, all the fronts buttons will be locked and will not work. Hold it more than 3 seconds again, unlock
• Press buttons RES + OUTPUT m + NEXT + ENTER with guide of front LCM screen display, to change output resolution of OUTPUT m
• Press buttons EDID + INPUT n + NEXT + ENTER with guide of front LCM screen display, to change the EDID mode of INPUT n
• SAVE button : Press SAVE+ OUTPUT m +ENTER, save current routing and screen layout to scene m
• RECALL button: Press RECALL+ OUTPUT m +ENTER, load scene m for current displaying
• INFO button: Continuously press INFO button, front LCD panel will loop display IR ON/OFF,RS232 Baud Rate and IP parameters etc,.
• IR: IR receiver, can be disabled by RS232 command
• 3x3 hdmi video wall processor with 4 Input 9 Output

2.2 Rear view

• LAN control(TCP/IP or Web Control)

IP address: 192.168.0.247, Submask: 255.255.255.0, Gateway: 192.168.0.1, Baud Rate: 9600, NetPort: 23

Web login account : admin,password : admin

• RS232-CTL

Baud Rate: 9600

• RS232-Phoenix:

Baud Rate: 9600

T: Main Unit -> PC, G: Ground, R: Main Unit <- PC

• Inputs and outputs

3x3 hdmi video wall processor with 4 Input 9 Output ;1 LR/Toslink(Spdif-Optical) audio output

Note: The audio output can be switched among IN1,IN2,IN3,IN4 via RS232 command or PC Tool

3x3 hdmi video wall processor with 4 Input 9 Output 's pictures as below: