Cut Length 6m Rebar Straightening And Cutting Machine Size 5-8mm
Cut Length 6m Rebar Size 5-8mm Rebar Straightening And Cutting Machine
Introduction of Rebar Straightening And Cutting Machine:
Rebar straightening and cutting machine, also called wire straightening and cutter,steel wire straightening and cutting machine. It belongs to one of the straightening equipment. For straightening and cutting steel bars up to 8 mm in diameter, the cutting length can be customized according to customer requirements. Adjustable straight and cut stainless steel wire, aluminum wire, cold drawing wire, plastic steel wire, etc., cut, small error, good performance.
The structure of the rebar straightening and cutting machine is to adjust the Angle of the straight wire die by rotating the high-speed rotor, to achieve the effect of straightening, and then through the wire wheel forward. After reaching the required size, the wire touches the positioning key and pushes the runway forward 5 mm, the upper punch presses the vertical cutting knife immediately cut off, the wire through the pressure plate on the vertical wire knife presses the open bearing, the wire automatically falls to the wire holder, if you want to change the length, move the positioning key.
Features of Rebar Straightening And Cutting Machine:
1. This rebar straightening and cutting machine mainly consists of Rotary plate type feeding rack,Protection frame,Main machine, Store wire frame,Control cabinet and Control cabinet.
2. The machine structure is rational, it is stable and reliable, simple operation, high automation and good performance.
3. The cut length and wire diameter can be adjusted according to your requirement.
4. This machine only needs one worker to insert the wire into the straightening assembly, then the machine can straighten and cut wires automatically.
5. The straightening moulds are alloy material, can be used long time.
6. Straightening speed of 130 m/min, usually in 120 m/min work, straightening short steel bar below 2 m in low and medium speed work.
7. High shearing accuracy, cutting length error ±1mm.
8. High straightness, straightening steel straightness is less than or equal to 2 mm/m.
9. Suitable for straightening shear cold rolled round, cold rolled ribbed steel bar, hot rolled round, hot rolled ribbed steel bar.
10. Low failure rate: due to the fine processing of parts, strict quality control, so after installation and debugging, under normal working conditions, can maintain trouble-free operation for a long time.
11. Advanced technology: this machine straightening, cutting and the world's advanced technology synchronization.
Technical Parameters of Rebar Straightening And Cutting Machine:
| Model | DX-HS5-8 | Wire diameter | 5.0mm-8.0mm |
| Cut length error | ±1mm | Cutting length | 500-6000mm |
| Wire Straighten motor | 4.0kw | Straightening speed | Max.35m/min |
| Wire cutting servo motor | 1.5kw | Weight | 400kg |
| Manpower | 1 person | Machine dimension | 7100*600*1100mm (L*W*H) |
| Required floor space | 10*3m(L*W) | Production capacity | 15 tons /10 hours (6mm rebar) |
Applications of Rebar Straightening And Cutting Machine:
The rebar straightening and cutting machine has the characteristics of reasonable structure, convenient operation, safe and reliable, etc. The rebar straightening and cutting machine is suitable for the straightening of chicken coop, rabbit coop, construction net, various welding wire, Shule board wire cutting and special-shaped net wire.
Photos of Rebar Straightening And Cutting Machine:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.